I have a GoldLine AquaRite system with a t-15 cell. My cell keeps on giving me a HI reading on the screen time to time. Whenever I check the Instant salt reading it gives me a level of 3900 ppm which is fine, so I recalibrate it, but after a while, it gives a High Salt reading again. Help would be greatly appreciated. Thanks
Problem with Goldline T-15 Salt System
- Thread starter saadahmadmalik
- Start date
Welcome to TFP!
You need to measure the salinity with another type of salt test to verify the salinity. The 3900 level is at the high end and at times might cause the high salt error and you will need to drain about 10%-15% of the water.
You need to measure the salinity with another type of salt test to verify the salinity. The 3900 level is at the high end and at times might cause the high salt error and you will need to drain about 10%-15% of the water.
Similar threads
