track

I accidentally drained the pool too low, and when we got our first big snow, it did some damage. It appears some of the legs of the pool were dragged, and in 1 section the sheet metal side popped out of the track. Check out these pictures. #1: #2: #3 & #4: #5 & #6: #7: Note: the #4 photo...

I have an inground SWG pool. I have at least 4 screws that have rusted away that hold the liner track in place, which is causing a section to droop. These screws are under the overhang of the concrete deck, so I am unsure of how to replace them. Any suggestions on how to repair this? What do...

Frustrated to no return! Installing an 18ft round pool. Yard was on a slight slope about 10" over the 19foot. so we had to dig it out. Its all dug out to within an inch all over. The problem is the ground is hard clay with shale rocks all throughout. This makes fine tuning to level out pavers...

We’re doing a remodel of our 30 year old, 50x15’ pool to update all finishes and add a spa. We’re trying to do a spillway that goes across the walkway into the pool, as (poorly) rendered here: We also want to keep our fairly new automatic pool cover. As part of the renovation, we plan to switch...