paint

  1. C

    Experiences repairing rust and painting a Modpool (shipping container pool) liner?

    I just moved into a house which had an 8'x20' Modpool with a Fastlane Swimjet from Endless Pools installed about 18 months before we purchased it. Unfortunately the bolts holding the window had some rust and upon closer inspection I found some rust spots in the container wall near the window...
  2. MWave36

    Conflicting "experts" and The Mystery Stain

    Hello all, I'm a wanna-be do-it-yourselfer trying to figure out if I should (or even can) de-stain my 1,560 ft3 fiberglass pool or paint it. Here's my dilemma: First, what the heck is this? This pool has been empty...
  3. P

    Pool concrete deck painting and coping question

    HI everyone, New to the forum and have a question. We have a concrete deck that has never been painted or stained in 15 years with some cracking but not much honestly. We are thinking of improving the look, powerwashing and painting it and wondering what products are recommended (Cool, etc.)...
  4. B

    AGP Exterior Paint Blistering/Bubbling Behind Soil

    Hi all, I have a Saltwater LX 8000 AGP pool from The Pool Factory, seems to get good reviews even on these site forums. It's a nice pool, get lots of compliments from installers and pool people that come by. It's painted/coated steel wall/beams with stainless wall at skimmer and all resin...
  5. D

    Any tips on prepping this surface for paint?

    Quick backstory: This house was purchased three years ago and the 50 year old pool's surface was in disrepair. We hired a local pool installer company who prepped and painted the surface with this: Ramuc Type EP Epoxy Pool Paint. After our second Michigan winter with this paint job, the paint...
  6. C

    Epoxy Pool Coating - Chalking Prevention

    Epoxy pool coatings are known to “chalk”. I am think of repainting my pool with epoxy but want to prevent it from chalking. I have seen postings online saying to keep the alkalinity levels at 150ppm and to ensure the calcium level is at least 300 ppm. I have tried this but the epoxy still...
  7. S

    Old rough plaster in good shape....

    I had originally posted below in 2012. Not much has changed other than the pool may have only been open 1 year or so since I posted. The photos attached are from 2013. As you can see the pool stained a bit between when I acid washed in 2010 and the photos in 2013. Apparently I didn't care...