Search results

Thank You Dave. I received the check valve you sent me today and it will be going on shortly. Thanks again Ric W. :-D

Thanks guys I needed that info, it helps. I probably only need one. Any ideas ware to purchase the new ones? The liquidator sight shows part # but cant find ware to order a new check valve.

I tried to blow through the check valve's by mouth. One valve I can blow through both ends with no problem. The other I cant blow through either end. It seem to me both are bad. Anyway I can find the part number for the valves but cant find ware to order new ones. Any help?? finding these...

This is the second year for my Liquidator. The first year I had very little "white stuff" (WS) I was running PH at 7.4 and CH at 70. This year I have run PH at 7.2 and have raised the CH to 150 I run the pool AT 7.2 to help with the iron stains and also use 3 oz metal magic each week. This...

kmb... I didn't spot a answer for the flex hose question. I also have flex hose and I was very uncomfortable about drilling into it and using that jet clamp. I replaced the flex with solid at the spots I needed to drill. I might be wrong but I felt I might not get a good seal with the flex or...

kmb...drill your holes as sabot recommended.skimmer line before the pump( close to the pump )and return line after the pump (close to the pump) don't remove the check valves if your liquidator is below the pool level. Good Luck Ric W.

I took my liquidator off line about three weeks before closing. I cleaned the container and stored it lines and all. I plugged the tube jets with vacuum caps that you can by at napa for about 2 bucks. At this point I was able to restart my pump and run it until I closed the pool. Pool is closed...

hi chuck I have a taylor k2006 and it is a great test kit. Also if you go to the home page of this forum under links you will see Trouble free test kits click on that link. These are also fas-dpd kits at a greater value with replacement regents available. I personally wouldnt go with anything...

sorry Chuck I didnt respond to your quest right. I think I would decide on which heat pump you want and get the electric run at the pool build. Some heat pumps are wired with different size wire and different breakers so start choosing the heat pump you like. the wiring takes the most time. Then...

Hi Chuck I also live in Ohio Bellville area about 70 miles straight south of Cleavland. I cant say about the swg because I dont have one. I use a heat pump and I oppened in April this year I cant say exactly what the elc bill is but it hasnt hurt me a bit and is much lower then i thought. I will...

hi isbarkley and welcome I also have a fiberglass pool 13*33 holds 10,000 gal the manufacture told me 10,000 gal was the fill for my pool you need to subtract the coping size( in my case it was 4" all the way around the pool which would make 8" so my pool would be 12'4" * 32'4". The center of my...