Search results

It's the picture. From closer you can see the bottom of the pool. You have to be afraid of chlorine. Ruined some of my clothes😂

Late response but wanted to give my update. Pool has been crystal clear for some days now. Maintaining the FC level to recommend number. Really appreciate everyone's help. See attached picture of the pool.

How do you remove those stains? I do see a around three black stains in the shallow part of the pool.

This is what I found online Risks of Over-Chlorination While slightly higher-than-normal levels of chlorine in your pool are harmless, exposure to an over-chlorinated pool can have adverse effects on your health and well-being. Excess chlorine can alter the pH level of the water in the pool...

Going to stop using the PUCKS and single packaged shock powder.. .Only use liquid chlorine or bleach.. Found a store near me Ocean state job lot that sells 1 gallon for $3. You are right about the low FC compare to CYA. I just added more chlorine to raise it. I still see white stuff in some...

@mknauss here are my numbers during the SLAM FC 10.5 Ch 225ppm CYA 40 Water still little cloudy. I can see the drain at the deep end. Should I add chemical to increase my CH?

During SLAM process, how often should backwash my DE filter? And when do backwash do I add more DE(80%) during SLAM? I am also running the robot around 3 to 4 times a day. I believe each robot cycle runs for about 2 hours. Is brushing still ncessary?

Here is the picture of what the robot pics up

Got it. I picked up two 5 gallon container from my pool store. Will start measuring the water for FC. I do have lot of landscaping around one side of my pool, as well as a sand box for my toddler to play in. Can the vegetation and sand have anything to do with lowering my CL levels? None...

Can I use this instead of liquid chlorine for shock? Pour in about three packs and brush the walls and floor. Keep the pump running until pool gets clear. Will that work?

I am relying on pucks for chlorine. CYA is from today. Water is still cloudy. Before water looked blueish and cloudy. It started getting. Lear after I added calcium chloride to Increase the CH numbers and sodium Carbonate to Increase TA. What should I do?

Numbers are from today evening. What am I doing wrong? I had dumped 5 gallon liquid chlorine and also use 3 inch pucks to chlorinate. My CH and TA are low as well. Do I need to do the SLAM process or can I add something specific? Cl 1 Ph7.2 FC 1 5 ppm Cc 1 ppm Ch 175 TA 70 CYA 30

Sorry for the late response. Yes I have been rushing to get the water cleared up. Stuff i put in there worked. Cloudiness went away and i am able to see the bottom of the pool now. I misplaced/lost the CL/PH tester block. Now i have to go to the pool store again. I really do appreciate...

I have the TF100 kit. I also took the water to pool store and numbers were. Lose to what I got at home. I picked up the calcium hardness bucket and used the TA increaser packet I posted earlier. Dumped both in to the pool. Opened the bottom drain valve as well. Now going to let the pump...

Right now my pool is clear but very cloudy. See attached pic.

Right now I just dumped 5 gallons of liquid chlorine to bring up the chlorine levels. Before that it was zero. After this j will use the 3 inch pucks.

Here are are my numbers from half hour ago Cl 5ppm Ph7.5 FC 16.5 CC 1.5 TC 18 CH 125 ppm TA 60 CYA 20 or lower. I know numbers are low for CYA, CH, TA. Not sure about TC. What do I need to get? I have tons of trichhlore 3 inch tablets, borax and the product you see in the pic. What else do...