Search results

it has been fixed...i think. the circulation pump was bad he replaced it and hopefully when i check it tomorrow it will be running normal

it is running on standard and f2. i check it couple times during the day and its fine. maybe it just takes that long for something to overheat? the guy that came to look at it ran it for a bit and tested the temps and he said everything checked out. i guess we will see what he says on thurs...

i had someone come out to look at it. he said couldnt really see anything causing issue other than the flow from old filters. he said try new filters and if it still overheats to call again. i put in brand new filters and it still overheated overnight so guess im going to call them again and...

im going to remove filters for night and see if it happens again. if it does happen i have a feeling it is the sensor for the thermostat which means i will be calling someone

the past 3 days my hot tub had an error code HH which means high heat. the temp flashed at 111 then when i hit a button it reset and the temp read 95. i first thought this was because dirty filter. i have cleaned the filters the past 3 days best i could in stationary tub because hose and such...

sorry for the delay, i appreciate all the help. I had someone come look at the hot tub and he said since it is tripping inside there is no issue with the hot tub. he ran it through a cycle and checked the temp of jets and the amps on it and it was fine. he said the breaker just needs replaced inside

it is a bullfrog x7 and amp breaker im not sure. it was hooked up by professionals and was running fine for 4 years

after resetting it is fine (if i dont turn both jets on for long) and goes through prime cycle and starts up. it only seems to trip when both jets are on at same time for about 20 mins or so. it does not trip when both jets come on automatically because they are only on for a min or two

i think i will call someone tomorrow. havent really used since original post and tonight it seemed to blow when all jets, heat pump, and lights were all on for awhile, but was fine with just lights heat pump and one set of jets on. i think its when everything is on at same time because its fine...

weve had the hot tub for about 4 years and no problems but about a month ago when i was in it in tripped at the circuit breaker. i reset it and it came back on. this time same thing happened but it will not come back on. i tried reseting the breaker but nothing. please help .......i did finally...