Search results

Thanks… trying those suggestions.

I noticed my Chlorinator leaking from the top last weekend. I took everything out to rinse, hooding it was just a clog in the drip part. When I turned it back on, I had water come up from the bottom, where it should be dripping into plumbing. Even with the drip line off, the canister fills and...

Things worked well to hear the pool, but now I’ve switched back to spa and it’s sputtering again/heating slowly.

Cleaned the cartridges about 6 weeks ago (full soak in cleaner and spray). Psi is 30 on max (4) setting on the pump. More pics coming. there is a fence preventing me from getting straight on. Right now, pushing through the pump at max seems to have worked. I’m going to give it an hour and see...

I bought this house last summer so I do t know everything as it was installed. I was running the heat in auto mode, so switched to service and have the pump on the highest setting. Will let you know. Here’s a pick of the set up.

It's an Pentair, but I don't know anything else about it. Pool is 18k gal. Here's an odd update.... I just turned it to Spa mode and it works great. Heated the spa 10 degrees in less than an hour, sound great, no errors. However, it appear there is small leak inside. I flip it back to...

Looks like my heater has kicked the bucket. I've already replaced the stack flu sensor. Now it runs for about 10 minutes, then says has the service light come on with no error code. Can anyone recommend someone in Houston to replace? Or can I buy one from Leslie's and do it myself? I'm...

There is a band on the bottom. I’ve done a few SLAMs and keep having algae come back. I’m wondering if the filters are contributing. As I said earlier, I also had a leak and the cycling of new water (had auto fill) made my CYA an FC levels way off.

I gave them a quick hose down Friday. Lowered pressure from 22ish down to 10. Stilling working the SLAM, then I’m going to try and give them a better clean with the comb I ordered.

I currently have a algae issue that I’m slamming. I had leak that was recently fixed that made it impossible to keep my levels up.

All, I’ve had my pool since August (moved to new house) and I’ve already sprayed my cartridges 3 times. If keeps giving me flow issues. I’ve never soaked them in cleaner. Should I try that and acid, of just get new ones?

First off.. Gig 'em. Second, I adjusted the floats again, and tightened the nut that controls the tail more. Who knows what did it, but it appears fixed. Thanks to all.

Not a her, but don’t really care. Adjusted the floats and still having the issue of the back up valve lift. I could watch it yesterday due to the storm but going to work on it this evening. How do I know if I need to replace the float on the back of the unit itself?

Adjusted floats and will check it tomorrow unless we’re flooded.

The are both swivels in red. I'll try moving some of those floats and see how it does.

It’s about 4.5ft deep

I'm in Houston and we're getting some pretty nasty rain here with the TS coming in, but I'll try in a bit. Hose length seems to fine though. It works great until the back up valve kicks on and then it lifts off the floor and get tangled. Sometimes it gets out of it, sometimes it gets worse.

Here’s how it looks.

Will do.

Correct. I’m actually not sue the exact number but it’s the 3 wheeled one.

Hello all… first post here, but all the info has been great. I’m a first time pool owner of about a month and keep having issues with my Polaris getting tangled. The back up valve was broken so I replaced that and I’ve changed the swivels. The current issue look to be that when ever the backup...