Search results

Sent you a PM

I’m trying to prevent air escaping by just putting a hose into another hose. With the clear/cloudy hose I can use hose clamps to keep the pressure. Would my idea not work?

First time pool closer. Purchased a cyclone and have seen some good ideas regarding getting an extra pump cover and putting the cyclone there (possible next year) Im curious if I can disconnect the pump to the filter (clear/cloudy tube) and back feed the cyclone through the pump to clear the...

A gentleman reached out to be and recommended I post here about a pool controller I built. Little back story - Been in IT for 20+ years but never had the oppurtunity to get into microelectronics. During COVID we decided to purchase a pool (something I said I would never do) and with a lot of...

@randytsuch - Thank you for those links for the PWB, that may be the way I go! I think I’ve got a good understanding now on the GFCI. I plan to have 8 physical momentary buttons and 8 LED’s that identify when they’re on/off. Using momentary switches because power can be triggered through...

As I’m reviewing these threads, there is mention to having GFCI, but am I missing them in the load center or are they outside the load center? are their any diagrams of how the wiring of the gfci into the din breakers are wired?

To expand further into the details of my project. I leverage home assistant, MQTT message and NodeRed for the automation. The plan was to create a custom PCB for the ESP32 but I certainly may change course after I get through all this info.

Wow, I cannot thank all of you enough in sharing information. This is by far the best forum I’ve joined! I will keep everyone posted on progress and share what’s I’ve done.

I have created a proof of concept using an ESP32 and Arduino code to control 8 relays. I have a single speed waterway plastics pump, Hayward heater, 3 intermatic valves and two lights (landscape and pool). I have various power needs to control everything 120v, 24v AC and 5V DC. I already have...

Anyone out there with a Waterway Oasis pool controller? I’ve made headway in integrating into the controller and wondering if anyone else has tackled this.