Search results

Thank you for sharing. Your sentiments are the same as mine. I’m pleased thus far and I hope to get many years out of this robot.

Hi there. I purchased a VRX iQ+ a couple of weeks ago and I too have the same canister full alert… I just ignore it. The clear rectangle that contains the blue lights does have some slight condensation. Idk if this is normal? Maybe others can chime in. The cleaner performs perfect for my needs.

Will do. Thanks again and have a great season!

Hey there. Thanks for the reply. I was torn between the Evo and Alpha. I need an ultra fine filter with the amount of dirt and sand that gets blowing into my pool (we live in the hill country and have a constant breeze) and I needed it quickly, so I ended up buying the VRX iQ+ at Leslie’s. It...

Thanks Jim. Well at least the mapping idea sounded good in theory. I appreciate your review and insights.

I’ve been on liquid chlorine for years now. The ozone generator was installed by the pool builder. My five year old pebble drinks acid too, so I was wondering if it was perhaps the ozone generator or something else. I didn’t believe it was doing much, if anything, so we’ve never relied on it for...

Thank you. Someone came by to pickup the items today, they are no longer available.

Hey @Cody, i know This is an old thread, I was wondering if removing your Ozone stabilized your PH? I too was sold the same bag of goods years ago and I too fight my PH.

I’ve purchased a new cleaner and migrating to Polaris. My 930 motor failed and everything else is good. I have two baskets, controller, cord, and in tact body (the controller will need a new plug end). I didn’t want to throw it away if there was someone else that could the parts. I live in the...

I’ve had a Pentair 930 for four years now and it has been great. I’ve replaced the cable and filters once. Today, I plugged my robot into the Controler, pushed the power button to begin cleaning and the controller turned off after blinking. I know the 930 is on the backside of its life...

You got it Jim. I’ll work through this tomorrow. For tonight, I’ll be doing things manually. Thanks again for all your help. Have a great evening.

Hi again. I’m on liquid chlorine and I use a Steiner pump that is connected to a GFCI outlet, I don’t use a SWG. As for schedules, I’ve set the lights to run from 7:45pm - 11pm Pool (lower flow mode) from 12:02pm - 11:58pm. At 12:01am the PL4 should be turning on the ‘pool high’ feature...

Thanks again for the quick responses. Is there a way to completely reset all schedules in the PL4 and start from scratch?

I also did as you mentioned and went to the PL4 schedules and found only the four timed schedules as mentioned previously. I didn’t not see any egg timers or additional schedules in the PL4 itself. The egg timers only appear in the ScreenLogic app.

Thanks for the quick reply Jim. You’re correct, there are apparently a bunch of egg timer that’s I’ve never even looked at. Since the PL4 was so limited, I’ve never attempted to add an egg timer. The four schedules I included in my original post was all that I’ve had programmed for years. Could...

For years now, we’ve been utilizing the Pentair ScreenLogic PL4/PSL4 with zero issues. Over the past month, it appears the PL4 has decided it doesn’t want to call for pool high or the chlorinator as scheduled. Setup: Pool pump is set as a schedule and connected to the pump circuit/button...

I live in San Antonio and I too am plagued with high CYA. It was recommended I switch to CalHypo… bad choice given our high calcium content in SA water. I have ordered a Stenner 15gal tank system to dispense liquid chlorine. We are very fortunate to have Fiesta Pool and Spa care over by the...

Thank you so much for your help and for the rainproof info, I didn’t realize that was separate. Unfortunately my PB installed a EasyTouch PSL4, which is extremely basic. The PSL4 doesn’t have a cleaner relay, so I’m relegated to using my only available relay, Aux 3. I would love the ability to...

Jim, Thank you for all of the info. This project will be liquid chlorine. If everything works like I’m thinking, I’d like to dose MA down the road. I opened the EasyTouch this evening to discover Aux 3 relay was unused. I was unsure if I needed to hardwire a 220v Steener or if I needed a 110v...

I am looking to move into the Stenner world and leave the heinous pucks behind forever! I currently have an EasyTouch PSL4 (don’t shoot me, it has served me well thus far) with a Pentair VSF pump, Pentair UltraTemp heat pump and Ozone generator (wiredto come on with the pump). My pool is 17,000...

Thank you for all of your responses, I appreciate your help! I attempted to use my K-2006C test kit and measure my CYA, as per the instructions here on the site. I either calculate 90 or 100 ppm. Either way, at this point, my CYA is too high, as is my water hardness. To maintain chlorine...

We are going on our third year with our pool. Initially everything was good, but as time progresses, I am losing my never ending battle with algae. The first 1.5 years we used TriChlor tabs and as our CYA levels increased, we were advised to switch to CalHypo. Every since the switch, we have...

Hello James, Thank you for the info. I just came back inside from the equipment pad where my PB had the local Pentair Tech on the phone with me, diagnosing the issue. Your instructions were exactly what the Tech had me perform. The issue was the heat pump never had the remote communication...

Jim, I looked at the ScreenLogic and I see from your response above that was the incorrect. Unfortunately I’m not sure how to check the addresses then. Is it in the menu on the heater, pump and/or easy touch or is it the wiring on the control board? I’ll provide whatever you’re looking for, I’m...