Search results

Awesome build thread. Thank you for taking the time to add all the detailed pictures and narratives. Agree with previous comments that the plumbing, electrical and steel work looks really good.

Thanks for the quick replies. Good idea. Will let you all know how it turns out.

Wanted to get thoughts on the best way to anchor the subject slide to my pool deck. Here are the details: 1. The deck is not yet installed. I will be installing 24"x24"x2CM MSI Arterra porcelain pool pavers on compacted 1/4" minus material. Installer will likely use sand (1/2" or so) for...

Ficus Nitida is likely out due to the frost tolerance and the root systems they develop. Thanks for the local landscape co's to check out.

Thank you. That is a good list. In doing a bit of research, I found my question in a blog post from another AZ pool owner. The response from the Maricopa County extension office offers some good information as well. Using Ficus as a Hedge/Screen Around a Pool in Phoenix...

It's really up to you. Personally, i think the flexibility of having it down the road is worth the negligible cost. An additional thought - as you stated, it's a standard feature from the PB, you'll likely receive little to no credit for not including it. It does add a little more complexity to...

Hello -- We are located in the Phoenix area. Hoping to get some recommendations for some plant types that would do well given the following: I have 3'6" clear space between the back of my coping and the existing block wall fence. The fence is overall appx 6' tall consisting of CMU and about...

My tile installer used C-cure Multiset 917 and MP Sanded 924. Product data on both appear to be acceptable for this application.

No slide yet. I have the pool filled and have been in it a few times, but still have a decent amount of work to do on the decking and water features. I have been eyeing the helix 2, but the price tag has prevented me from pulling the trigger just yet.

We ended up going with MSI Arterra porcelain pavers/coping. I have the coping installed and the decking is on order. They are pretty reasonably priced and a better non-slip surface than the travertine. Also, more durable.

Thanks for the pics. It doesn't appear that much progress was made on the shotcrete operation part 1. Most of your cage is still exposed with proper clearances to earth/existing shotcrete. Agree with CT's take.

So there will be a cold joint between shotcrete pours? I'm not a structural engineer but I think there should be something applied to ensure that it bonds and forms a monolithic shell. There are lots of products on the market to accomplish this. Take a look at the general structural...

No BYOP. Did meet with a PB early on to get some ideas, but ultimately took the design and made it what I wanted it to be. Engineering was through a company out in CA that has typical structural engineering packages for residential pools. Created sub list and budget and then solicited pricing...

Shotcrete was completed over the weekend. Pics uploaded to link in previous post. Working on selecting coping, decking, tile, and interior finish.

Has anyone had experience that they would be able to share with the products in the link below from artistic pavers? www.artisticpavers.com I was able to look and feel some samples at an expo over the weekend and was thoroughly impressed. I like the claims that they stay cooler than some of...

I'm in the process of GC'ing my pool. So far it has gone pretty smooth. Currently have the shotcrete complete and are looking at the interior finish/tile and decking phase to begin in a couple of weeks. The subs that I have worked with so far have all been really exceptional. They know each...

Thanks Jay -- OB route. So far it has been going pretty smooth. Our backyard is on the north side of a two story, so that is the shade this time of year (winter). Summer is a different story. Planning for lots of umbrella sleeves and possibly a shade canopy over the shallower side. PS I...

Ok. So far so good. Broke ground on 12/23. Excavation, plumbing, and rebar complete. Have pre-gunite inspection sheduled for early next week and shotcrete guys are on standby. The plans from the original post were modified slightly after some layout and research. Updated plans in the link...

I agree with CJ -- The perma cast item seems like a better solution. I'm sure the hole in your skimmer will void the warranty.

32 jugs of bleach and planning on more? How much does your water cost?

Looking good. Excited to watch another AZ build thread.

Another unfavorable post of the pentair SWCG product. I have decided to nix the SWCG component from my project. I plan to start my pool off jug dumping approach and then work in a Stenner pump setup down the road. I'll have my plumber leave me a tee where I can inject once my setup is...

Hello fellow Arizonans :D. I'm just about finished up with the planning/bidding phase of my OB pool project. I am shooting for a permit in the next month and ground break shortly after. I have received several quotes from subcontractors on the major components. I'm working with a couple key...

Thank you for the responses. Good information to think about prior to finalizing. I do have the TF100 test kit and the speed stir. Haven't used it in 4 or 5 years (had it at the old house with my last pool). Will purchase a refill kit prior to opening up my new pool.

Ok. Thanks. In researching options for liquid procurement, I called A&M Pump and Pool supply yesterday in Mesa (Center/Mckellips) and they carry 2 and 4 gal pkg units. I believe it is 12% and the if I recall correctly, the guy quoted $16.99 for the 4 gal (+deposit +tax). Thought I'd share...

Awesome build thread, Jon! Very nice.

Very cool, Jon. I'm thinking about a Stenner setup as well. This is a great thread. Where do you buy your liquid chlorine here in AZ? Thank you.

My initial equipment/spec list: GALLONS - Appx 19,000 GAL FILTER - Pentair Clean & Clear Plus Cartridge 520SF PUMP - Pentair Intelliflo VS 3HP AUTOMATION - None SWCG - Circupool (model TBD) CHLORINE INJECTION - Stenner pump setup (MAYBE LATER ON) SKIMMER - Waterway Renegade Venturi ROBOT -...

Moved from here... Convert to SWG. CircuPool RJ60 vs Pentair IC60 w/ Automation. Self Install - Page 3 I'm in the process of spec'ing equipment for a new build. Originally, I had planned for no automation and using the circupool SWCG, pentair intelliflo VS 3HP. My approach was taking what...

Re: Plumbing diagram input Thanks for the bump, Kim. I did do a bit of research on the equipment pad layouts and valving. I'm working on that design and will post it here. I think my question of 2 pumps vs. 1 will come down to what I want to have going at one time. Operationally, I don't...