Search results

Not exactly the chart I was looking for but will work just as well, can we put something up in pool math with this in it?? I'm sure the Stenner crew would get good use out of a tool like this! Thanks for posting its exactly what I needed. Steve

A while back a member posted an excel spreadsheet on his stenner pump and run times equaled a certain amount of FC I plugged my numbers into it and printed it out and have since misplaced it, can anyone point me to that thread or link if they recall the post I'm referring to it was very...

To The Top

Have had the same mesh winter cover for 23 years (IG pool) and its at the end of its life, I'm considering a solid cover with mesh center has anyone had any dealings with Ameri-Brand Products? Looking to send off my old cover this Spring and have a replacement made off the original for this...

Great info, I've been keeping my CYA in the 35-40 range all summer long adding 2.5 FC of liquid through my stenner 3 times a day. I add 3-4 pucks in my chlorinater per month set on 1 1/2-2 setting and what I've found is I havent had to add any acid my PH holds steady in the 7.2-7.4 range TA 90...

Anyone know of a bulk chlorine source 5/10/15 gallon in the Kansas City area?

I added a Stenner this spring and love it, to piggy back off Bama I've found best time for me to maintain FC is to inject for 30 mins from 8:00-8:30am then again from 4:00-4:30 pm and again at 9:00-9:10pm my pool is in direct sunlight from 9:15am-3:30pm and I've found I can keep a more steady FC...

I got the 10gpd fixed rate pump. I was leaning towards that Mode 2 and that pretty much confirms it thanks Bama

Ok, changing motor and adding P1353ME & Stenner here's my questions. As I understand it Circuit 1 & 2 will be used to supply 2 speed motor for hi/low speed and circuit 3 for stenner pump, programming modes I'm thinking mode #2 so the Stenner can come on independent considered mode #4 but as...

Well, I sourced a STS1072RV1, I was told once they are gone they will be no more, I got 1 of the last 3 left, if any is interested in these and don't need or want the STS1102RV1 shoot me a PM and I'll tell ya where I got mine.

So I ordered a 3/4 HP 1.5 SF 2 speed motor the sts1072rv1 and a sts1102rv1 1 hp 1.5 SF shows up instead of the sts1072rv1 I'm sure the 1 hp motor will work am I gonna waste a lot of energy running it? I see the 1 hp is rated @ 7 amps Vs 5.4 on hi and 2.3 Vs 2.2 on low. Most savings being...

Jim, thanks I decided to go with the 35300 got a pretty good deal on it, its more than I need but I like the idea of having more options than I need for down the road and I picked it up for $35.00 than I could have gotten the 25300 complete for.

Can anyone tell me the difference in the 25300 & 20000, other than the 23500 includes the P1353ME timer included, does the PE20000 include the breaker bus? I only ask cause it seems that I can buy the 2 pieces separately cheaper than buying together with the 23500.

It is plumbed correctly

Thanks, after more research I'm thinking of going with a Intermatic P1353me timer in a PE20000 box pro/cons to the P1353me? How do they do if left outside over winter in cold climates?

I am planning changing out an old single speed motor to a 2 speed, current motor is 3/4 hp running on 110v thru a Intermatic T101, my plan is to swap just the dry end out to a sts1072rv1 2 speed motor changing over to 220 adding and adding a Stenner pump, I'm looking at the Intermatic T3000r...

Question regarding 2 speed motor. Replacing an old 3/4 HP single speed motor to a 2 speed 3/4 HP (sts1072rtv) currently have the motor on a timer that is inside the house, equipment pad is 150' away, I run the pump twice a day for 3 hours. My plan would to be to run the 2 speed pump on low...

Something I have done for many years is after closing I drop a fish tank pump in the pool and let it run 24/7, its rated to move about 60 gph I check weekly and add liquid chlorine when needed, my numbers yesterday where. FC 4.5 CC 0 PH 7.3 ALK 70 CYA 40 CH 150, I have vinyl lined pool and...

I've talked to Hayward and Circupool about a 40K system and they say they can pull up to 8-10 Amps @ 220 now the "controller" only pulls around 1-2 AMPS, now I'm sure the 8-10 amps is in super chlorinate but still say 1/3 for regular use is still a lot. there's a reason they require 8 gauge...

I fought this, this summer at peak my CYA was 140 :mad: I twice drained just below the return lines and refilled, only used liquid and got mine down to 40-45 and I maintain a FC of 4-5 and never had any algae issues. Only issues I've been dealing with is iron stains. I have kicked around a...

Need some advice here, current set-up is a 3/4 HP single speed motor (AO Smith SK1072) running on 110V attached to a Hayward EZ-FLO pump, Hayward S-200 sand filter, plumbing is very simple all 1 1/2" lines, 2 return lines, 1 skimmer, 1 main drain, I do have a Rainbow 320 plumbed in that I use...

Anyone have any experience with this brand? Pro's, Con's am considering a system and INYOPools has this 60,000 system at a pretty nice price, looks very similar to the haywoods control panel.

Good stuff, thanks for replies, Josh, where do you source liquid in 55 gallons? Karen, did you go with the RJ plus or regular RJ model? How do you like the controller? Thanks

Also using the 8.25% bleach from Walmart, Pretty much planning on just changing my motor to a dual stage and still looking a the SWG's lots to consider, waiting feedback on a post I have going in the SWG section, I'm either going SWG or Stenner and stay with liquid but I have to come up with a...

So, been researching SWG's and am considering these 3, the Hayward Aqua Rite T-15, Pentair IC40 or IC60, or the Circupool rJ45 or rJ60 any pros or cons to any of these units or should I consider any others? Anyone using the Aqua Pro

I'm using Liquid only and am using dropping about 4ppm per day CYA around 45ish I'm adding about 96-128 oz of liquid per day in my 21,000 IG, researching SWG's and dual stage pumps myself.

Have an old Hayward E-ZFlo pump with a 3/4 HP single stage motor, considering a new motor and looking at a 3/4 HP 2 stage motor, plan on doing a Hayward Aqua Rite SWG system at same time. Question is, will I have enough flow on low speed 1750 RPMs for the SWG to work? What's others experience...

Thanks, do some of you guys use a Stenner pump to add acid to control PH rise? I see in your pic a tank and Stenner in background.

Thank you, would someone with a Hayward Aqua rite 15-t cell be so kind to measure the length of the cell, planning if I have room for this, thanks

It does help, I figured the cost of the stenner and a good timer along with barrel would get me close to the cost of the swg, I'm handy so it would be a DIY project, my pad and equipment is about 125' from the house can these SWG controllers be mounted outside in a 4 season climate? Looked as...