Search results

  1. C

    Failing T-15 SWG Cell Experiment

    I have a bunch of old cells leftover. The biggest problem I can see is that it's unknown how long a used T-15 cell will operate in T-5 mode. A couple days, a couple weeks, or a couple months? Each cell will be different. It's not like there is a hour clock built into the cells. Theoretically...
  2. C

    Salt cell temp sensor error message

    Magnifying the serial number on the shows the serial number starts with 1E which is Hayward's 3000 hour warranty replacement cell which would normally last about 15 months. Some sellers either intentionally or unintentionally sell them as full price T-15 cells so it's buyer beware. My...
  3. C

    Generic T15 Salt Cell Options

    Any time I see the Platinum Edition generic cell recommended, my spine shivers. All you have to do is google Salt Pool Store and add the words "reviews" or "scam" and you'll find out the warranty is worthless, the cell rarely makes it past one year, you have to return ship it to Australia, and...
  4. C

    High salt on Aquarite

    When mixing an OEM display board with a generic PCB board that result can sometimes happen. Sorry don't know of a solution. Could be a simple as waiting a few cycles and error magically disappears.
  5. C

    High salt on Aquarite

    You should be more concerned with the amperage than the high salt reading on the display. The high salt light is triggered when amperage reaches 8.0a or higher . the display could read 4200 and the amps could be 7.5a and high salt light wouldn't turn on. 88-0 is an aftermarket board. No t-cell...
  6. C

    Hayward Aqua rite HIGH salt level

    Think you have to go into Service mode, then select Chlorination and proceed from there with various option.
  7. C

    SUNSEEKER SS40

    Save your money and try something else imo. This is a CompuPool product so you will end up having to call Australia with any questions or warranty exchange. The USA retailers who sell it online (Salt Pool Store and The Pool Folks) have VERY poor reputations if you just Google them. I believe...
  8. C

    Another T-15 replacement thread

    You wonder why pool product prices are out of control? At the end of the 2021 pool season I predicted prices for Hayward T-15 chlorinators would go up by $50-$100. Turns out I was wrong. They went up by $200. Most places selling it for $899 . Just when we thought precious metal coating prices...
  9. C

    New salt cell

    <Salt Free Pools has a Platinum Edition replacement for half-the-price of the Hayward, $339 vs. almost $700. Plus the warranty is 2 years longer. Opinions, please.> Anybody but those guys you mentioned. Just google their website and add the word "scam" and you will see what I mean. You will...
  10. C

    Hayward SwimPure Plus Reading Zero Salt

    Personally I would consider that odd that a company doesn't want a six month old cell back even if it failed. I wonder if that is standard procedure for this import company.
  11. C

    SWG costs

    Based upon what I am seeing in the supply channel I estimate that retail prices for T-15 cells will increase $50-$100 for the beginning of the 2022 pool season.. The bottleneck is real.
  12. C

    AquaRite r1.59 resetting Average Salt

    For AquaRite, move the switch from auto to off and check all of the readings. 2400 87 31.4 0.00 98p -0 AL-1 r1.59 t-15 Move the switch back to auto and recheck the readings. 2400 87 26.2 5.65 98p -2500 AL-1 r1.59 t-15 Move the switch to off for a minute and then back to auto and recheck the...
  13. C

    AquaRite r1.59 resetting Average Salt

    James: I explained specifically what the issue is. I'm thinking that it's a board issue.
  14. C

    AquaRite r1.59 resetting Average Salt

    Please refresh my memory - the AquaRite r1.59 board when resetting average salt reading, the relay clicks and we get 25V/6a on effort #1 but we when reset it a second time there is no click and we always get 31V and 0a and an instant salt reading of -0. A new cell is installed replacing a one...
  15. C

    swap out Hayward panel/Jacuzzi cell for Jacuzzi panel/cell or figure out what problem is?

    Just resolder the K1 solder points on the back of the board. I had five customers in the Phoenix call me in the last 48 hours with the same issue and everyone has fixed it by resoldering. Must have had quite the lightening storm out there.
  16. C

    Hayward Turbo Cell (T-cell-15) SWG Failure

    You can always take your Hayward cell to the pool store and have them put it on their test machine. It will give you a PASS or FAIL reading. This way you will know for sure what to do next (i.e. replace the cell or something else)......
  17. C

    CircuPool rj-45 Plus Reads High Temp - No Chlorine Generated

    So is this just a temporary fix that needs to be switched back when the new flow switch arrives? If the temp sensor inside the cell is bad why wouldn't you just replace the cell if it was still under warranty?
  18. C

    thoughts on the Circu-Pool Universal 25 SWG for my pool

    FYI...The rounded cells pictured are CompuPool cells. The stateside wholesalers sometimes switch manufacturers. There is a reseller on eBay selling T-15 generic units for $350 right now and IMO they will be in for a huge shock when they find out they have to call Australia for any service as...
  19. C

    Pool Coping Coating Lifting Off Concrete

    Thanks, that is what I figured.. Add it to the list of expenditures. At least I got almost 15 years out it.
  20. C

    Pool Coping Coating Lifting Off Concrete

    The coating that was applied to the concrete appears to be lifting off in spots. Assume that water got into those areas and did it's thing. Only in a few spots but how would you fix and would you redo the entire perimeter or just the spots that are affected?
  21. IMG_0128.jpg

    IMG_0128.jpg

  22. IMG_0127.jpg

    IMG_0127.jpg

  23. IMG_0126.jpg

    IMG_0126.jpg

  24. IMG_0123.jpg

    IMG_0123.jpg

  25. C

    SWG costs

    That's great to hear. Hopefully everyone has the same experience you did. And it didn't cost you anything to call Australia. <Customer service from Australia was excellent.>
  26. C

    SWG costs

    In prior years that has always been the case especially if newer models were being introduced. Retailers would just blow out the older models. Sales in colder months normally go down because demand for pool products would go down and retailers would be more inclined to make deals. However with...
  27. C

    Hayward AquaRite S3

    Any pool professionals had a chance to check out this new system? It keeps getting delayed, now due Summer 2021. https://www.hayward-pool.com/shop/ProductDisplay?catalogId=10057&categoryId=&productId=1000000011503&langId=-1&parent_category_rn=&storeId=10201
  28. C

    SWG costs

    Another Chinese made cell although DSP will go to great lengths to tell you it's not.
  29. C

    SWG costs

    Spot prices for iridium and ruthenium, the two catalysts that are on the plates inside a salt cell have gone down by 15% since the beginning of June. Whether that translates to lower prices for retailers definitely remains to be seen but in the short term (thru next Jan) I would say the retail...
  30. C

    Hayward Aqua Rite SWG low salt

    Can you show us a picture of your cell? Also when you are resetting the avg salt level, why are you moving the switch up to Superchlorinate BEFORE the numbers cycle. All you are doing is locking in that 500ppm number immediately.