Search results

  1. platinum_

    Jandy jxi 400 not heating (propane)

    I’m about to do a clear memory and see if that helps
  2. platinum_

    Jandy jxi 400 not heating (propane)

    The main aqualink box where the connection wires are on the green bridge in the top right?
  3. platinum_

    Jandy jxi 400 not heating (propane)

    Is the 2nd box what i need to be looking more in depth of? Since the main power for the heater is coming from that one even though the communication cable is going to the main box?
  4. platinum_

    Jandy jxi 400 not heating (propane)

    Tech said its my communication cable as mentioned in the original 1st post, i have watched that video twice now it’s helpful and all my settings are just like his etc. I will do a clear memory tomorrow and start from scratch again and see if that helps. Yes the wires are going to the heater...
  5. platinum_

    Jandy jxi 400 not heating (propane)

    Last time i called they would not help me since I’m “out of warranty” they kept trying to connect me to a service tech
  6. platinum_

    Jandy jxi 400 not heating (propane)

    I may have to do that @PoolGate just trying to see where the program function for the heater would be in the web portal app of aqualink.
  7. platinum_

    Jandy jxi 400 not heating (propane)

    Okay, i will try to see what i can find on here James Thank you!
  8. platinum_

    Jandy jxi 400 not heating (propane)

    James so i replaced the wire for the remote and still nothing, Would you know what to look for in the “WEB” side of the AquaLink portal by chance to make sure its done correctly?
  9. platinum_

    Jandy jxi 400 not heating (propane)

    James holy cow you did it! Now what is the permanent fix for this?
  10. platinum_

    Jandy jxi 400 not heating (propane)

    Will do give me 5 min
  11. platinum_

    Jandy jxi 400 not heating (propane)

    I went outside and tried this and nothing I waited about 3 or 4 minutes normally it fired up in about 1
  12. platinum_

    Jandy jxi 400 not heating (propane)

    The wires I have circled go to my AquaLink control panel. Is this correct then or they need to be going to the green pin on the J6 block?
  13. platinum_

    Jandy jxi 400 not heating (propane)

    Negative still not working boss i was unsure if the quick flash of the led was for the air flow fault or just getting power then going back off..
  14. platinum_

    Jandy jxi 400 not heating (propane)

    I switched to spa mode and had the delay of valves turning as soon as it fired up the FENWAL led illumination for a split second and is off now.
  15. platinum_

    Jandy jxi 400 not heating (propane)

    James pool is running as normal and no flashing or light is on per FENWAL module
  16. platinum_

    Jandy jxi 400 not heating (propane)

    Will do 1st thing in the am for you!
  17. platinum_

    Jandy jxi 400 not heating (propane)

    Ok let me go check Would i have to have the system running normal operation filtering or have it set to the SPA Mode and then look James? Thanks
  18. platinum_

    Jandy jxi 400 not heating (propane)

    I have no idea? When the panel is off do I look at the led when the spa is on when I try to make it work? Sorry just trying to make sure I have it set up correctly when I look at the LED
  19. platinum_

    Jandy jxi 400 not heating (propane)

    I’ve searched for a thread reguarding this and have yet to find anything please help inform me if possible. I have a Jandy Jxi 400 (will attached pictures) and everything was working perfect in the spring and now a few months later I used to AquaLink app and fired it up. Waited and waited and...