Search results

  1. J

    Cartridge filter keeps breaking

    I know it has been said, but I agree with everyone else... your system is 100% reversed plumbed. You can tell because the pleats are puffing out and the top end cap cracked where the core is placed. Water should flow outside in versus inside out. Looking at the pictures, the outside of the...
  2. J

    817-0175 N cartridge replacement???

    Can you confirm the measurements of the cartridge? Is the Length = 28 1/4" or 23 1/4"?
  3. J

    Reusable Type B filters....need opinion and advice

    Arosas, just curious, what do they define as "reusable"? How long will that cartridge last? All aftermarket cartridges are considered "reusable" in the sense that you can wash them and then put them back in.
  4. J

    jacuzzi / cantar

    In Canada, Jacuzzi pool tanks are built by Carvin. In the US, Leslie's has the exclusive rights to Jacuzzi and they have it built by a different manufacturer.
  5. J

    Sta-Rite Cartridge Filter?

    The Sta-Rite system 3 system is a beast of a cartridge (500 sq ft). It is a two cartridge system (one sits within the other). It is very unique with how water flows and filters within the tank. A lot of people it because it can hold a ton of dirt, therefore you don't have to clean it often...
  6. J

    1200 RE filter

    It sounds like you have a Hayward C1200 tank... the equivalent Pleatco # = PA120, Unicel # = C-8412 and the OEM # = CX1200-RE.
  7. J

    Need Hayward Filter Identification

    You could take out the filter cartridges to measure them or see if there is a part # on the end cap. Then you would have to work backwards to see which tank it is.
  8. J

    Hayward 5030 Cartridge Filters

    If the pressure rises right after you clean the cartridges, it might be time for a new set. Over time debris gets lodged into the media and no matter how well you clean it, it won't come out. As well, just because a filter looks white and clean, doesn't mean it's really clean.
  9. J

    Rx Clear Filter Balls

    Drew, We have done extensive testing on filter balls and alternative products. If you currently have a cartridge tank, you cannot add the filter balls as a cartridge replacement, you would have to purchase a sand tank and use the Filter Balls as the filtration medium. If you have any...
  10. J

    What filter brand? (Hayward, Unicel, or Porpoise)

    Both Pleatco and Unicel private labels cartridges for Porpoise.
  11. J

    The great filter test begins

    Hi KDpoolguy, just wanted to correct you on one thing. Pleatco cartridges are not made with Reemay, we use an exclusive Point Bonded media designed by our engineers called Pleatco Advanced. I am looking forward to seeing your results. Please let me know if you have any questions. Thanks, Jeff
  12. J

    Can you clean your cartridges too often?

    You should really only clean your cartridge when you see an increase in 8-10 PSI from the starting pressure.
  13. J

    Problems with Sta Rite 3 Filter

    It sounds like you need some new cartridges... I know the system 3 cartridges should last a while, but 10 years is a bit too long, especially if you are seeing the pressure jump after cleaning it.
  14. J

    Clean and clear 150 sf

    The 200 sq ft cartridge will have a higher dirt holding capacity, so you should see a longer time in between cleanings than the 150 sq ft version
  15. J

    Sand/dirt getting into the pool through the jets - cartridge filter

    Can you post pictures of your cartridge? Based on the size of the debris you posted, that should definitely get caught by the cartridge. It is possible there is bypass on the top or bottom of the cartridge if it is not seated properly on the manifold.
  16. J

    Mineral dirt and cartridge filter

    Your filter cartridge should definitely capture the sand. In fact, sand typically clogs the cartridge and is a pain to clean out. You should make sure your cartridge is fitting properly on the manifold and no dirt is bypassing. Do you see any other dirt bypassing your filter?
  17. J

    De in pool

    It is possible there is a small hole in the fabric that is letting DE into the pool. Over time as the DE builds a layer on the outside of the grid, it should plug that hole preventing DE to enter the pool
  18. J

    Replacement Filter for Pentair Quad DE 100

    Correct, we do not make replacements yet, hopefully beginning of 2019. I believe Unicel makes replacements (part #s C-6900, C-6960, C-6980).
  19. J

    Pleatco filter replacement?

    We currently do not make replacements for the Quad DE Cartridges. Hopefully next year
  20. J

    Pentair 180009 FNS Plus Fiberglass FNSP60 D.E. Pool Filter Grids

    Hi, Assuming your current grids are 30" tall and require 7 Full Grids and 1 Half Grid, yes, the PFS3060 is the correct part number for the full set. If you had the Pentair Purex Grids, that would be a different part number, and that where most people get confused. Please PM me if you have any...
  21. J

    Best Pentair cartridge filter replacement?

    Pleatco has two manufacturing facilities, one in NY and one in Mexicali Mexico. We own both facilities and both use the exact same raw materials. The information posted is not correct. If you have any questions, please PM me.
  22. J

    Are these two filters interchangeable?

    Hi, I know I am late to answer. The only difference between the PA106 and PA112 is 6 square feet of filtration fabric. The reason for having two part numbers that are very similar is because Hayward has two different tanks, so replacements are made for both tanks. Even though 6 square feet...