Search results

  1. JeaniB

    Water fill up question

    Call and ask,.. I filled my 32’X16’X54” for about $40 with city water, much cheaper than paying to haul water in.
  2. JeaniB

    New above ground pool question

    Welcome!! The corners are designed to “float”. I installed a 32X16X54” this summer, it does the same thing. It allows for the sides to rock a bit when there is a lot of splashing in the pool! Good luck and enjoy!
  3. JeaniB

    FINALLY!! All the hard work, crying, and cussing paid off!! *pics!*

    Congratulations! Looks great,.. enjoy!
  4. JeaniB

    Well Crud

    Second install complete!! No broken pavers, level and my stairs are now in,.....just waiting for CYA to arrive tomorrow! Thanks for your help everyone!
  5. JeaniB

    Installation- Intex Above Ground

    Hi Sarah,..You have come to the right place,. These folks are awesome! I just recently installed my Intex 32X16X52 pool. First of all make sure your ground is level. It Must be level. Make sure each paver is level. The foam board that you were using is what I used. I used gorilla tape to tape...
  6. JeaniB

    Well Crud

    This is a before pic,.. it was the last leg on the left that buckled
  7. JeaniB

    Well Crud

    It was actually about 1/4-1/2 inch lower!! Had three small children in the pool all day, lots of splashing, then noticed this after they were gone. Intex is sending me two new legs as I’m still in the 90 day warranty period. Ugghhhh,.. I have to start all over with salt, borax etc😢 I’m assuming...
  8. JeaniB

    Well Crud

    So much for having crystal clear water!😩😩
  9. JeaniB

    Just wanted to say thanks!

    Become a supporter! Throw some money their way! I’m certain this site has saved me way more money than I have contributed!!
  10. JeaniB

    Thank you TFP! Just got the best compliment!

    So,.. I started my research 2 years before I finally purchased a pool. Of course my research sent me here. I’ve followed your advice, my pool contains, salt, CYA, Borax 50ppm, and enough Bleach to get me started. I added Muriatic acid when loading the Borax. Nothing else, and I’ve never, ever...
  11. JeaniB

    BTB due and mannitol for Borate testing

    Thank you!! I’m hoping to love the feel and to get longer life from my SWG! My pH hasn’t raised past 7.5 since adding the Borax and MA,.. before it would raise to 7.8-8.2 almost every day.
  12. JeaniB

    BTB due and mannitol for Borate testing Hmmm,... after reading this, I thought I had the perfect set up for borates. I’m hoping to extend the life of my SWG, and enjoy the feel of the water. What am I missing? At any rate, it’s too late , the Borates are in the pool!
  13. JeaniB

    BTB due and mannitol for Borate testing

    I’ve seen it mentioned that I can use BTB dye and mannitol powder to test for borates. How is this used?
  14. JeaniB

    HDX test kit

    Thank you, yes I did miss read Borate for Bromine. So I still don’t have a Borate test strip. I have ordered the Lamont test strips. I was hoping that I had more color options to choose from, and that it might be easier to read. But you are correct it is not any easier to read. So, now I have...
  15. JeaniB

    HDX test kit

    Has anyone used this? Is it accurate? I have trouble distinguishing the colors in my Taylor safety kit, and I’m having trouble finding a borate test kit. I thought this would be a good alternative, and it is available at Home Depot. Any thoughts?
  16. JeaniB

    Pool lighting idea...

    I’m using an LED pond light right now,.. because I had it. Pond supplies are less expensive than pool supplies.
  17. JeaniB

    How to replace pool leg on intex 22x52 ultra frame?

    I have seen this method mentioned several times. I have two pavers that broke and one that the leg just slid off of. How exactly did you use this jack? Did you lift the top rail?
  18. JeaniB

    Intex 16 by 32 corner joints

    Theses are floating corners, even when full they float. Not even sure why they are there. I can easily pull mine out. The only one that isn’t floating is the corner where my paver broke.
  19. JeaniB

    Intex krystal clear sand filter pump 10"

    Mine has a label,.. 14” 77lbs
  20. JeaniB

    What the heck is happening here?

    Looks like my tubing is collapsing?? Checked the skimmer, unhooked all the t tubing,.. ??? Just cheap tubing? I can’t seem to upload a video,.. my tubing is collapsing onto itself when I turn on my pump! How can I upload a video?
  21. JeaniB

    Intex Automatic Pool Cleaner- stopped help

    My Intex Automatic Pool Cleaner worked great,.. twice. I’ve googled and watched some video tips,.. still not moving! It appears that the little slider doesn’t move far enough to the right and the lever is not pushed far enough to close. Any ideas?
  22. JeaniB

    Intex 16x32 pavers breaking

    Remember that the legs move out, away from the pool sides as the pool fills!
  23. JeaniB

    Intex 16x32 pavers breaking

    Two of mine broke as well! I think I’m only about 3/4 inch off, so I haven’t drained mine.
  24. JeaniB

    Aeration to raise Ph

    Thanks every one! I did not use that bleach!! Hope everyone enjoys their weekend!!
  25. JeaniB

    Aeration to raise Ph

    I was afraid you were going to say that:( I had a long day, in my bathing suit, was gonna get in and kick my little legs to raise my pH,'ve ruined my night :(
  26. JeaniB

    Aeration to raise Ph

    And the only bleach I have is @ made with cloromax technology “ is this just something to look good in the label? Or am I going to have to get dressed and go to the store?🤪
  27. JeaniB

    Aeration to raise Ph

    So,. Finally got my TA down, pH is 7.3, FC 2.5,.. CYA 60-70. SWG. Yesterday was the first day of full sun and two adult swimmers. I’m adding some bleach. My question is how much aeration do I need to raise my pH? I rigged this from an old pond pump. Is it enough?
  28. JeaniB

    Muriatic acid/ poolmath

    OMG,...I left a Level I Trauma ED after 18 years!! I've been in Cardiology for about 2 years now.