Search results

  1. M

    AGP Out of Round

    So after a big rainfall last night I came out an noticed brownish spots all over the bottom of pool… is this algae forming already? I did test strips yesterday morning and just needed to add some Stabilizer, which I did around 5pm about 4 hours before the storm. Want to cut this off before...
  2. 56D711B1-5365-487C-84E1-C488B4E707B4.jpeg

    56D711B1-5365-487C-84E1-C488B4E707B4.jpeg

  3. M

    AGP Out of Round

    It’s the Hayward 1.5hp PowerFlo Matrix
  4. M

    AGP Out of Round

    Yeah I think I just needed some further tightening. I’m up and running. Have had the pump on high for about 6 hours now. Going to keep it on high for at least 24 hours then probably switch it to low. I have the timer set to manual (always on for now), what’s best practice for a 24’ round...
  5. F7490516-B1EA-4302-A5BF-D26209633B04.jpeg

    F7490516-B1EA-4302-A5BF-D26209633B04.jpeg

  6. M

    AGP Out of Round

    I think I got it, just needed to tighten a little more, I’m all good now! Thanks for all the help and advice… hose finally off, good to go!
  7. M

    AGP Out of Round

    Looks like some leaks around my wide mouth skimmer. Installed the butterfly gasket on metal wall as instructed, lined up faceplate inside pool, poked hole through liner from the inside, lined up the basket outside and screwed together. Cut liner out. Are leaks typically caused by needing to...
  8. M

    AGP Out of Round

    Little nervous about filling when I’m not around/awake for various reasons, though i guess with it almost full my worries about liner not fully stretching or pulling away from the wall are probably in the past. Just will ease my mind to turn it off overnight I suppose. Need to get about one...
  9. 8A7F04D7-CCF9-4D14-910B-E86E516898AD.jpeg

    8A7F04D7-CCF9-4D14-910B-E86E516898AD.jpeg

  10. M

    AGP Out of Round

    Skimmer cut in, pump/filter hooked up, ladder placed. Gonna let it run another 90 minutes or so then cut it for the night. Back at it by 8am tomorrow and hoping will be full by time kids get home from last full day of school!
  11. 8DF79071-8139-4CD0-8A63-E07CF38B3C1E.jpeg

    8DF79071-8139-4CD0-8A63-E07CF38B3C1E.jpeg

  12. M

    AGP Out of Round

    Stopped it at about 9pm local time, will pickup again in the morning when the sun is out and hitting it.
  13. M

    AGP Out of Round

    Got everything in and lined up pretty well, started the water at noon, so the long journey begins… should be about 30 hours I’m guessing… little more than a quarter of the way there.
  14. M

    AGP Out of Round

    I should have at least 2-3 more adults, plus 12 year old son (which may be more of a detriment than help!).
  15. M

    AGP Out of Round

    Finally was able to get out to measure the bottom rails this morning (had some rain this week). 12-6 measurement was 23’10-1/2” 9-3 measurement was 24’1” The other diagonals were roughly 23’11” Will be re-smoothing sand today and ensuring uprights are plumb again. Hoping to get the liner in...
  16. M

    AGP Out of Round

    Those were the top rails, I will head out today and measure at the bottom, thanks for the tip. Should I worry about the top being slightly larger than 24’ or should the liner (unibead, j-hook over top edge) give it some play?
  17. M

    AGP Out of Round

    Tried to search around online and only got a few hits, one an old thread here about 2” out of round and another saying 24’ pool shape could be 23’ one direction and 25’ another direction and it won’t matter. I am in process of putting up used pool, have the walls up, everything is within 1/2”...