Search results

  1. E

    Aqua cal heat pump tripping breaker

    Yes this is brand new. I just spoke with them they recommended replacing the breaker, I’ll try that first.
  2. E

    Aqua cal heat pump tripping breaker

    I reached out to them earlier today waiting to hear back.
  3. E

    Aqua cal heat pump tripping breaker

    I installed an Aqua cal electric heat pump a few weeks ago and I am having a problem with it tripping the breaker. Sometimes it will go a day without tripping sometimes only a few hours. I had the electrician back out to look at it and he doesn’t see anything wrong. It’s wired with #6 wire and...
  4. E

    Aqua cal heat pump install?

    That’s a good idea, I will check later and see how much extra cord I have available. Would I also have to move the flow switch to the discharge side of the heater or can that stay in the current location?
  5. E

    Aqua cal heat pump install?

    I was thinking about removing the 90 behind the salt water cell so I could continue the pipe coming off the valve straight into the heater and then straight back and 90 into the salt cell. If that makes sense? Does that seem like it would work?
  6. AD03D026-601A-436A-899D-45D9AFBA2B7C.jpeg

    AD03D026-601A-436A-899D-45D9AFBA2B7C.jpeg

  7. E

    Aqua cal heat pump install?

    It says it is not necessary with a salt water generator which I have, I just wasn’t sure if it was still a good idea?
  8. E

    Aqua cal heat pump install?

    I have that covered also, is a hartford loop recommended? I’ll try to post a picture tomorrow of my equipment pad and what I was planning to do.
  9. E

    Aqua cal heat pump install?

    I have a licensed electrician doing all the electrical, I will only be doing the plumbing.
  10. E

    Aqua cal heat pump install?

    I am in the process of buying an aqua cal T135 heat pump, my question is has anyone installed one DIY? Am I crazy for trying? I think I can save about $1,300 installing it myself, just looking for first hand opinions from anyone who has installed one. Thanks
  11. E

    Recommendation for pool heater.

    I will take a look at those 2 brands, I will be heating a pool only. thanks
  12. E

    Recommendation for pool heater.

    I have a 37x18x26 L shaped pool, approximately 27,000 gallons according to the pool store. I am looking for recommendations for a Electric pool heater, what size is recommended? Any brands to stay away from? Thanks
  13. E

    Sodium bisulfate?

    Ok. When you say the return I assume I can poor it in front of the skimmer or near the 2 main drains? Is there a recommendation on what strength to buy? Lastly I will not be around to do this until late tonight, Amy reason the kids can’t use the pool? Thanks.
  14. E

    Sodium bisulfate?

    I filled out my signature with my information. So my best bet is using muriatic acid to lower the PH? I assume I am ok to use the pool today at the current levels? What is the recommendation for wait times if I use dry or muriatic acid? Your help is appreciated.
  15. E

    Sodium bisulfate?

    Ok. That’s what I currently have. I just tested my TA and also PH. TA. 100-110 PH. 8 I was planning to use some to lower PH, is that not a good idea? Also I’m assuming if PH is greater then 8 I will get a real dark purple? I am using a Taylor K-2006. Thanks for the help!
  16. E

    Sodium bisulfate?

    When using the pool math app is sodium bisulfate the same as dry acid?
  17. E

    CYA images

    That’s exactly what I did and it’s clear? When I use pool water I’m coming up with approximately 70
  18. E

    CYA images

    When I add the solution with the reagent the test is clear all the way to the top of the tube. What am I doing wrong?
  19. E

    CYA images

    So the black dot should disappear at 50ppm correct using that solution?
  20. E

    CYA images

    Probably a stupid question, but was is the procedure for using the 50ppm standard solution?