Search results

  1. H

    Electrical connection for Hayward Aquarite and Intermatic Digital Timer

    So this works and allows for the SWG to run in low and high. Now I still get the large thump sound when the SWG starts up while in low but no thump sound when it starts up in high. If I start the pump in high and switch to low, there is no thump sound. In in south Florida. Does it matter if I...
  2. H

    Electrical connection for Hayward Aquarite and Intermatic Digital Timer

    Com 1 has the blue cable coming from the pool pump and one cable from SWG. No 3 has black cable jumper coming from ac in and other black cable from SWG.
  3. H

    Electrical connection for Hayward Aquarite and Intermatic Digital Timer

    Actually it’s different then your diagram. It’s going to Com 1 and No3 vs your diagram which is No2 and com 3. I will look into your diagram tomorrow and see the results. Thank you everyone.
  4. H

    Electrical connection for Hayward Aquarite and Intermatic Digital Timer

    Here pics of the actual connections. I have no problem moving SWG to AUX and setting the parameters to run during the hours that the pump is set to run, but in testing it yesterday when I tested the following below and decided to put everything back. 1. Placed the black cable from SWG that was...
  5. IMG_6462.jpg

    IMG_6462.jpg

  6. IMG_6461.jpg

    IMG_6461.jpg

  7. H

    Electrical connection for Hayward Aquarite and Intermatic Digital Timer

    Hello everyone. I am trying to figure out the proper electrical connection in order for the SWG to work in both low and high pump speeds. It currently only turns on with in high speed. My pool timer is the intermatic P1403 and it is currently wired as follows: Terminal 1 = Hot wire coming...
  8. Screen Shot 2021-09-30 at 9.36.08 AM.png

    Screen Shot 2021-09-30 at 9.36.08 AM.png

  9. H

    Issues with Hayward Blue Essence

    Here is what I’m finding: 1. New gauge installed. Low pressure is about 4psi 2. I moved the SWG from NO-3 to Aux NO-4 and left COM 4 empty. I used a cable jumper from AC(terminal 1) to Aux NO4. I turned on pump in low and aux on. SWG would turn on but once I switched to high SWG would turn off...
  10. H

    Issues with Hayward Blue Essence

    Are you watching my computer screen? LOL. I was just finding the timer manual online to see how AUX works. I have the intermatic p1403me. Will see if interlock is available on this timer.
  11. H

    Issues with Hayward Blue Essence

    I have #4 AUX empty. I will connect the SWG cable into AUX and provide results later today. Thank you
  12. H

    Issues with Hayward Blue Essence

    I wouldn't be able to run it on low speed most of the time as there is not enough suction for the pool vacuum. On low speed the pool vacuum hardly moves.
  13. H

    Issues with Hayward Blue Essence

    New gauge was ordered. This morning I decided to open fully all valves while pump was on low and no flow was detected. Also in reviewing the setup, the salt water panel box does not even turn on on low. So I inspected the wiring into the electrical panel. I have the intermatic digital two...
  14. Screen Shot 2021-09-30 at 9.36.08 AM.png

    Screen Shot 2021-09-30 at 9.36.08 AM.png

  15. H

    Issues with Hayward Blue Essence

    Actually I just turned it off and the gauge remained at 4psi. Didn’t move. So maybe on low it is lower then 4psi. I will open the main drain to see if flow switch activated. Thanks again for your help.
  16. H

    Issues with Hayward Blue Essence

    Filter pressure on low is 4psi. How would I get it to work on low? What do I need to check or do?
  17. H

    Issues with Hayward Blue Essence

    Here are some pictures. I believe part of the problem why there is not enough flow is the distance of the pool and the pump which is close to 50-60 ft. I have always believed that when the pool was built they undersized the pool pump. As for cleaning the pool filters, I do this every couple...
  18. IMG_6435.jpg

    IMG_6435.jpg

  19. IMG_6434.jpg

    IMG_6434.jpg

  20. IMG_6433.jpg

    IMG_6433.jpg

  21. IMG_6432.jpg

    IMG_6432.jpg

  22. IMG_6436.jpg

    IMG_6436.jpg

  23. H

    Issues with Hayward Blue Essence

    I went with the T3 because It was a significant cost saving and didnt think I would need one for larger pool. Guess I was wrong. So My pool pump is two speed and I have it set to run for 3 hours in low speed and 5 in high. Going to try 2 hrs low and 6 high. Although in low speed, chlorine is not...
  24. H

    Issues with Hayward Blue Essence

    Because it is not producing chlorine. It is currently below .56pm for TC and FC. I only get chlorine results if I put it in super chlorinate. If I do a pool shock, then I will have chlorine for a few days and then back down to below 1. Thanks for your help
  25. H

    Issues with Hayward Blue Essence

    Here are my answers: Settings during off: 4200, 88, 30.9, 0, 91p, -0, AI-0, R1.59, T3 Settings while on Auto: 4200, 88, 26.8, 3.85, 91p, -4200, AI-0, R1.59, T3 Settings after one minute shutdown: 4200, 88, 26.8, 3.85, 90p, -4200, AI-0, R1.59, T3 Actual salinity is 3900, measured at the local...
  26. H

    Issues with Hayward Blue Essence

    Good day everyone. For some time now I have been pushing along with my old cell (t-9 model). After coming across that it would no longer produce chlorine after 6 years, I decided to buy a new cell. Well it so happens that I am having the exact same issue with the new cell. This time around I...
  27. H

    Intermatic Timer PE103ME Losing settings

    Good afternoon. Today as I was troubleshooting the salt cell controller, I detected that my digital timer loses the programming once the power is cut from it. I looked to see if it had a battery backup to replace but I couldn't find any. Does anyone know if there is a hidden battery installed...
  28. H

    Aquarite No flow Light

    So I went ahead and ordered the connectors. I also removed the circuit board from the box and started looking into the rj11 female jack. I could see the pins inside bent inward which would cause a faulty connector. I was able to pull out pins 3 and 4 which are the ones that make the...