Search results

  1. 1

    Need Help with Sense and Dispense Timeout

    I tested the water yesterday and the free chlorine level was 9ppm. The ORP showed 625 and it was in alarm. The alarm was "Sanitizer Time Out" I cleaned the probe and the salt cell last week. I do not store the probes in the winter. The pool is in service all year. I believe the probe is...
  2. 1

    Need Help with Sense and Dispense Timeout

    Have you taken the probe out and cleaned it? Salty No, That will probably be the next thing I try. I will also check the salt cell.
  3. 1

    Need Help with Sense and Dispense Timeout

    Last spring I installed the Aquarite Pro with Sense and Dispense and it worked great all year. This spring I am having a problem with Sanitizer Timeout alarm. I will reset the alarm and in a few days it will go back into alarm. Even though it is in alarm the ORP is always between 655mv and...
  4. 1

    Pentair Clean and Clear Filter HELP!!!!!

    Does anyone know how to replace the inner core in the Pentair Clean and Clear Filter housing? I have the CC200 and I broke the core trying to remove the filter. I can't figure out how to get the old one out to replace it. I can't find any screws so it must be a twist lock system but I tried...
  5. 1

    Frozen water around pump from cycling between pool to spa

    I have the same issue on my pump and also on my filter o-ring. Mine will only leak when the temperature gets down in the low 20's. I think it is caused by o-ring shrinking or the o-ring hardening caused by the cold. I just let it leak and when it warms up it melts.
  6. 1

    Anybody have any experience with Electric Shock Sensors for pools

    "domct203" I believe the investigation concluded that someone had previously worked on the pump and did not reattach the bonding wire. I think they also found some other electrical problems as well. It was sad that this young girl lost her life. The local government enacted a new rule that...
  7. 1

    Anybody have any experience with Electric Shock Sensors for pools

    "Bama Rambler" I agree with you that the bonding system is number one but I also believe that you can't be to safe and the alarm would be good as a secondary system if it is reliable. I do not know of anyone that has the alarm but for me it would need to work 100% of the time and it should be...
  8. 1

    Anybody have any experience with Electric Shock Sensors for pools

    Recently a lifeguard at a public pool was electrocuted when she put her hand on the metal ladder. She had just arrived at the pool in the morning to open the pool and she was all alone. It was found out that the pool pump had failed and water got in the motor and there were some problems with...
  9. IMG_0288.JPG


  10. IMG_0287.JPG


  11. IMG_0286.JPG


  12. 1

    Not Sure What To Think. Totally Confused About What Chemistry

    I just replaced my Aquarite system with a new Aquarite Pro with Sense and Dispense with acid feed and the installer was trying to tell me how I needed to keep the chemistry for the system to work correctly. Well I am totally confused now. He told me that I need to keep the PH at 7.4 and the...
  13. 1

    Water Flowing Back Into Pool When Pump Turned Off

    When you replaced your filter and pump did you remove a check valve? Can you post a picture of the current setup? I have a check valve in the suction line so it can't drain back when the pump shuts off.
  14. 1

    Muriatic Acid Vs "Green" Muriatic Acid

    mknauss Thanks for the reply. The "Green" bottle did not list the concentration but I thought it must be diluted because it is taking much more to bring down the PH.
  15. 1

    Muriatic Acid Vs "Green" Muriatic Acid

    I went to Lowes's to buy Muriatic Acid and they sell both "Green" and regular Muriatic Acid. They were out of the regular which is all that I have been using so I bought some of the "Green" and used it in my pool. What is the difference and which one is better for a pool. I like the low fume...
  16. 1

    Baking Soda Blaster to Remove Calcium?

    We have tried the soda blaster and it did not work well and made a mess. We found that the pumice stone works well but it is labor intensive. On the heavy build up spots we us a flooring scraper that we got from Home Depot. It has a heavy duty razor blade and it works good to chip it off but...
  17. 1

    Recommedations for chemical automation system

    I currently have the Jandy RS-8 iaqualink automation system and I have the Hayward Aquarite SWG. I am looking to install a new chemical feed automation system that I can control from the iaqualink app on my phone. I am looking something that will test and add chemicals as needed. Any Suggestions
  18. 1

    Pump bearing starting to whine: what to do?

    If you are sure it is a bearing problem I would go ahead and replace the bearing. I have replaced bearings in my Whisperflo pumps and it is better to do it now rather than risk damage to the motor if the bearing locks up. I change the bearings myself. If you are mechanically inclined and have...
  19. 1

    Pool Skimmer Question

    After further examination I see where the slide plate should be but my slide plates are missing. I will order new slide plates. Thanks for the help.
  20. 1

    Pool Skimmer Question

    Looking down in my skimmer there are two holes. I can only feel suction on one of the holes. Not sure why it has two holes. I do not see any way to adjust the opening. There is a hole in the pool wall about two feet below the skimmer. Could that be where the second pipe goes?
  21. 1

    Pool Skimmer Question

    I have two skimmers in my below ground pool and one of them has less flow than the other. They are both tied together in a common line to the pump. Is there a way to regulate the flow in each skimmer? Thanks
  22. 1

    AquaRite T15 salt cell replacement

    Does anyone on here have any experience with the generic version of the T15 salt cell? They are much cheaper. Are they any good or should I just spend more and get the AquaRite brand?
  23. 1

    Aqua rite control board gone crazy

    I have a Hayward Aqua Rite salt generator and I have lost control of the output percentage. When I look at the display the percentage is not steady, it changes constantly. When I check the chlorine in the pool it is high even though I have dialed back on the percentage. Has anyone seen this...
  24. 1

    Telescoping Fountain Head Replacement

    I have a built in telescoping fountain that the head spins and it is worn out and I would like to replace the head. I can't find any information about who makes it. I removed it from the pool and the head has a brass tube that is pressed in the head and it has a lock collar on the bottom of...
  25. 1

    Hayward swg issue

    I have a Hayward SWG and I can not control the percentage. The chlorine level is rising and i keep turning the dial down and it makes no difference. The percentage on the display is not steady, it jumps from 35, 98, 45, 63 and I currently have it set on 35%. Thanks for the help.
  26. 1

    Jandy rs temperature sensor

    Does anyone know is there an aftermarket temp sensor replacement for part# 7786. This is a 50' sensor for air/water/solar by Jandy? Thanks
  27. 1

    Spa temperature problem

    Yes. When the heater turns on the temperature goes up to 100 degrees but the automation system still shows 86. The temperature on the heater shows 100 but the iaqualink app shows 86 and it never changes.
  28. 1

    Spa temperature problem

    I have the iaqualink controller for my pool spa combo and my spa temperature reads 86 degrees all the time. It never changes. Could the temperature sensor be bad?
  29. 1

    Pentair filter question

    Does anyone know what the difference is in the Pentair Clean and Clear 150 and the 200 filter? The parts list shows that they have the same dimensions. Will the 200 fit in the 150 housing?
  30. 1

    Whisperflo Pump Problem

    How do you know that it's a bad O-ring? I tried replacing the o-ring and it still did not seal. Has the pump run dry recently? NO Is the skimmer running dry? NO Try turning the pump on and off a few times to see if you can see water squirting out when you turn the pump off. Some water...