Search results

  1. douglasj76

    Upgraded Above Ground Pool 18x33 and deck rebuild

    That's a lot of work, but good job. Keep the updates coming.
  2. douglasj76

    Quantum - 15'x30' Oval

    Congrats! We did a 15x30 oval from Light House pools about 2 years ago. One thing I would suggest is doing a small deck (we did a 10-10ft) at one end of the pool. Even having a small deck is a absolute game changer rather then walking up a ladder into the pool. Also We converted to salt this...
  3. douglasj76

    Edge-25 with 2 speed pump question

    Been running my edge 25 for a few days now. 24/7 on the lowest setting. Chlorine seems to be stable and not getting too high(test every morning). Also, so far so good on my pumps low speed and not triggering the units low flow sensor. I installed a outdoor timer just in case I need to run the...
  4. douglasj76

    Edge-25 with 2 speed pump question

    Appreciate the reply. 👍
  5. douglasj76

    Edge-25 with 2 speed pump question

    So I installed a circupool Edge-25 and so far working good. I have a 2 speed pump that I run on low 24hrs a day. Reason I do that is I have a heater and like to keep the pool at a steady temp. Is it OK to run the SWG 24 hrs a day? Obviously keeping the SWG on a low setting as to not over...
  6. douglasj76

    Above ground salt pool

    Thank you for the replies. I ordered the edge-25 system from discount salt pools. Can't wait to get it and get things going.
  7. douglasj76

    Above ground salt pool

    Is anyone here running salt on their above ground pool? My pool has mostly resin parts (rails, caps ect) and I think aluminum walls. Can I do this?
  8. douglasj76

    SWG and 2 Speed Pump

    Cool! Seems to work ok? Guy on the phone at DSP said pump needs to be in the 1800-2000 rpm range.
  9. douglasj76

    SWG and 2 Speed Pump

    Hello, I am considering switching over to salt water. Question I have is I run a 2 speed pump and just run in at low speed 24/7. Looking at the Circupool SWG's. Will these operate running my pump on low speed? Thanks for any insight.
  10. douglasj76

    Buying used Aquabot Turbo Classic

    I ended picking it up. Looks brand new. Ran it for about an hour. Works very well. Climbs walls no problem. Anyone else have one that they want to share their experience?
  11. douglasj76

    Buying used Aquabot Turbo Classic

    Found one on Facebook. Claims that it is a 2014 model and only used twice. Looks brand new in the pics and I can pick it up for $300 tomorrow morning. Would be using it on a 15x30 AGP. Should I do it?
  12. douglasj76

    New Pool Heater Mastertemp 400 not working. no regulator on gas line.

    How long is the gas line to the heater, what size is it, and what is the service pressure your entire house runs at? Also do your other gas appliances have regulators on them?
  13. douglasj76

    Closing new Pentair 125 heater

    I have the same heater. Look in your instruction manual and it tells you how to winterize it. If you don't have them you can go to the pentair website and download them. I pulled the pressure switch out for the winter, turned the switch to off, and there is no drain plug.
  14. douglasj76

    15x30 cover

    Can someone reccomend a decent winter cover. I'm OK if it just lasts the winter then I toss it in the spring. Just want to make sure it lasts the winter tho. Pretty good amount of leaves and snow will be on it.
  15. douglasj76

    ~ Rusted Galvanized Gas Pipe Replacement ~

    It comes with directions on how to cut the correct depth. Only thing the chamfer tool does is round the cut edge. I did it without the tool. If you want complete confidence buy the tool as well.
  16. douglasj76

    ~ Rusted Galvanized Gas Pipe Replacement ~

    The product my local plumbing supply sold me was made by honeywell. It is made of steel, flexible, and just slips right on to the PE pipe. Just like a shark bite fitting for a water line. You just cut the end of the PE pipe square, and use a chamfer tool to smooth out the cut and the riser just...
  17. douglasj76

    ~ Rusted Galvanized Gas Pipe Replacement ~

    Same here. I bought a roll at my local plumbing supply with the risers. This stuff if very easy to work with. In fact it was the easiest part of my install. If the run is not long, best to dig and just redo it.
  18. douglasj76

    ~ Rusted Galvanized Gas Pipe Replacement ~

    This run won't ever rot
  19. douglasj76

    ~ Rusted Galvanized Gas Pipe Replacement ~

    I would dig until you find the joint. Then dig enough to get a couple wrenches around it and separate that last pice. I'm not sure how long the run is but if it was me I would dig up the whole run and replace with poly pipe and proper risers. Looks like a fun project tbh. Here's the run I did...
  20. douglasj76

    Help with Draining solutions!

    Are you able to trench to a drain / gutter downspout? The trench don't have to be that deep, and you can probably dig one in a few hours, or create a French drain. You definetly have options. Digging ain't fun but luckily you won't have to dig deep. I would just do it. Then when it's done you...
  21. douglasj76

    Intex as a brand

    That's what I would be afraid of. I once saw a 80 ft oak tree fall on a 27 ft above ground pool in a storm. Incredible all the water.
  22. douglasj76

    Intex as a brand

    I never priced one out... So I figured it would be price. It's funny I see really nice setups with people spending $$$$ on landscaping, decks, etc and a very inexpensive pool.
  23. douglasj76

    Intex as a brand

    I see so many pool owners in here that choose this brand for their above ground pools. What is the reason? To me they seem like a cheap brand. Are they really that great of a value compared to other brands? Especially when you get into large sizes... Wouldn't you want something with more...
  24. douglasj76

    New AG pool owner

    Pics!
  25. douglasj76

    Hayward Heater Problem...unresolved

    Glad you got it figured out.
  26. douglasj76

    AGP getting built

    Easiest way is to install tapatalk app on your smart phone and post through there. Very easy to add pics.
  27. douglasj76

    AGP getting built

    Shouldn't be a problem. PICS PLEASE
  28. douglasj76

    Hayward Heater Problem...unresolved

    Does it have a pressure safety switch?
  29. douglasj76

    Well, this is adios...

    Goodluck. You may be back though. Grandkids like to swim too.
  30. douglasj76

    Non stop rain filling pool almost to coping

    There really is no exact answer. Just depends on how much rain you get. Drain enough so the skimmer can function properly, keep an eye on the chlorine level by testing it once / twice a day and sumpliment with additional liquid chlorine as needed.