Search results

  1. W

    SWG + Spillover = Acid for dayzzzzzzz... wat do

    Exactly the level of detail I was looking for. Makes sense, thanks so much! TA has crept up with pH, working on getting it sub 100, this morning when pH was 8+ TA was up to 180. Lots of evaporation out here in the desert so trying to keep LSI neutral because the calcium can get pretty bad...
  2. W

    SWG + Spillover = Acid for dayzzzzzzz... wat do

    Maybe you can explain this, but I dont understand the chemistry as to why this would be the case. Equating chemistry to conservation of energy in physics I'm not sure is an accurate representation of whats happening. No matter what the pH is, the SWG runs the same amount of time. Do...
  3. W

    SWG + Spillover = Acid for dayzzzzzzz... wat do

    Having trouble keeping pH and TA in alignment, the fight is real. Our 10k gallon pool has floor jets that cycle to both the pool as well as 1 zone that cycles to a spa with spillover. There is no way to stop the spa zone which means there is no way to stop the spillover. The floor jets are...
  4. W

    Broke an umbrella hole trying to remove the cap... Now what...

    Ok managed to determine it was just the cap and flange that exploded luckily. Managed to get the rest of the flange out with a hacksaw and flathead screwdriver. Crisis averted!
  5. 1456.jpg

    1456.jpg

  6. 20201230_141307.jpg

    20201230_141307.jpg

  7. 20201230_134631.jpg

    20201230_134631.jpg

  8. W

    Broke an umbrella hole trying to remove the cap... Now what...

    I broke the cap and flange trying to get the cap to unscrew... there is nothing to grip now, how would you suggest I pull out the remaining flange sleeve so I can put a new one in...
  9. W

    Intellibrite w/EasyTouch in pool and spa on 2 functions, cant figure out how to set to 2 colors or use the "config" setting

    Ok had a eureka moment... Both the pool and spa light in the easytouch are set up as "INTELLIBRITE", which they are... but I believe this is what is tripping up the easytouch. When i change one light the other one lights up and vice versa and treats them as the same thing. Once I changed the...
  10. W

    Intellibrite w/EasyTouch in pool and spa on 2 functions, cant figure out how to set to 2 colors or use the "config" setting

    Hi Jim. Yep I am able to manually turn one or both on individually, but when I try to set a color say on the pool light while that circuit is on, the system automatically turns both circuits on and sets to that color. I can't figure out how to separately set a color for each. I also have no...
  11. W

    Intellibrite w/EasyTouch in pool and spa on 2 functions, cant figure out how to set to 2 colors or use the "config" setting

    Hi all, I currently have a pool light and a spa light, both are intellibrite, both are set to intellibrite and assigned to the pool and spa light function on EasyTouch. I have been trying to do some type of red and green cycling opposite between the pool/spa for xmas, but cannot figure out...
  12. W

    Need help w/ EasyTouch setup for Solar + Gas Heater... A/B valves/circuit functions, etc

    Thanks Jim! Your concern about it being set upside down is noted and I'll definitely look into it. The other point about the spa I believe is a non issue. I have floor jets that cycle across both the pool and the spa anytime a pool program runs, so both the pool and the spa are getting...
  13. W

    Need help w/ EasyTouch setup for Solar + Gas Heater... A/B valves/circuit functions, etc

    Thanks so much! Yes I turned the heater settings way down so they didnt accidentally attempt to kick on before I was confident it was set up properly. I have 3 actuators in my setup, one that I believe triggers intake from the spa floor when a spa program runs, one that triggers flow through...
  14. W

    Need help w/ EasyTouch setup for Solar + Gas Heater... A/B valves/circuit functions, etc

    System works now for the most part, but I have yet to kick on the heaters. I replaced the salt cell in the same direction that they initially had it and havent gotten any flow errors. I am familiar with water chemistry and the pool is balanced and in good condition (other than hardness being...
  15. W

    Need help w/ EasyTouch setup for Solar + Gas Heater... A/B valves/circuit functions, etc

    Hi all, New to forum and new to pool ownership. I recently bought a house with a boatload of pentair equipment installed. It is a in ground gunite pool with raised spa w/spillway. It has a 400k BTU pentair heater as well as a roof passive solar setup. Also has VSP and salt water generator...
  16. 120839576_1083861438724336_2990298239613102977_n.jpg

    120839576_1083861438724336_2990298239613102977_n.jpg

  17. 120815305_365101047870792_3011325384049884999_n.jpg

    120815305_365101047870792_3011325384049884999_n.jpg

  18. 120809431_356744139098931_1849929539503003070_n.jpg

    120809431_356744139098931_1849929539503003070_n.jpg

  19. 120793923_3687223901296153_9215342943690161387_n.jpg

    120793923_3687223901296153_9215342943690161387_n.jpg

  20. 120735773_687466511862702_458640701088086986_n.jpg

    120735773_687466511862702_458640701088086986_n.jpg

  21. 120655452_1542588735925731_4445547421023470270_n.jpg

    120655452_1542588735925731_4445547421023470270_n.jpg

  22. 120601942_435503220750846_3841112348766344179_n.jpg

    120601942_435503220750846_3841112348766344179_n.jpg

  23. 120544062_388754012287047_3473463246896575545_n.jpg

    120544062_388754012287047_3473463246896575545_n.jpg

  24. 120527607_352778209490005_335963908179226042_n.jpg

    120527607_352778209490005_335963908179226042_n.jpg