Search results

  1. M

    Any gas line gurus in here ?

    Thank you
  2. M

    Any gas line gurus in here ?

    Trying to figure out largest NG heater I can run . I have 2psi pressure 180’ length 3/4” pipe. Thanks
  3. M

    Water fall issues

    Eventually you would think it break down though right ? Or I would get pieces of it coming out .
  4. M

    Water fall issues

    This is season 5 for pool , start of season it was fine but I have noticed that the middle waterfall started having less and less pressure . I don’t think I’m losing water . One valve directs 100% of the water to the 3 waterfalls . Any ideas ?
  5. M

    Pentair Mastertemp , Is the ASME worth the money?

    Im sorry but I can not find the search feature on the forums. I am looking to add this in series with my heat pump, What does the extra 4-500 get you ?
  6. M

    Black staining on plaster from rebar repair

    Pool builder had to cut out some of the pool because rebar was to close and the metal fragments now have stained the plaster black. What chemical should I use for this ?
  7. M

    Would like to add a Pentair Gas Heater in combination with my heat pump .

    Where/how would I plumb this ? Inline before or after the heat pump ?
  8. M

    Slam in progress FC still way low

    Is it possible you confused my original post with someone else? So I have over added and my FC is at 35 Water is crystal clear and Cc has been 0 , I will report back before bed , again thanks everyone for help so far I think I’m on the road to recovery
  9. M

    Slam in progress FC still way low

    Beginning of slam 9am FC .5 CC .5 TA 90 Ph 7.2 after adding 9 jugs and waiting 30 mins 930 am FC 7 CC 3.5 retested after another 30 mins 10am FC 2.5 Cc 1
  10. M

    Slam in progress FC still way low

    Started a new thread for the slam. 42000 gallons swg i added 9 jugs of 128 oz 10% which should have taken me to atleast 20 , I have a FC of 7 I waited 30 minutes after adding to retest , I have the pump running at 3000. add more bleach? Or wait and re test - - - Updated - - - And CC now...
  11. M

    Do I need to shock?

    - - - Updated - - - Starting with 8 of these , how long before I check FC levels ? THAnjs
  12. M

    Do I need to shock?

    Preventive maintenance per the diamond Brite people , thanks for the quick responses everyone, I’m a little confused with all the different types and strength of bleach so I’m going to Walmart to but a pallet or so�� and I’ll post back here soon
  13. M

    Do I need to shock?

    Tf-100 year kit no well water and have never had it turn green before this year. only stuff I have added this year is calcium harder jacks magic purple jacks magic algae preventer cya imbgoing to get bleach now, I’m shooting for FC of 24 right? And I need to maintain that level until the water...
  14. M

    Do I need to shock?

    My pump was down for 3 days , 2 of which we had a ton of people swimming and water got cloudy. Once pump was fixed 2 days ago I can’t get FC level past .5 even if I throw in 5-6 120 oz jugs. The water is almost clear now but still can’t get FC level up, do I shock? Also noticed water got green...
  15. M

    Is this algae or pollen?

    Feels like wet dust, comes right off with a scrub or water movement. The amount of this stuff coming out of the robot is insane, I will post a picture soon as I pull out robot. thanks a bunch!
  16. M

    Is this algae or pollen?

    It is a layer around the entire pool on the tile
  17. M

    Is this algae or pollen?

    Water is crystal clear and levels in check. - - - Updated - - - Ike more - - - Updated - - - Also notice I’m getting this stuff in the robot it is in the form of a sponge almost
  18. M

    Diamond Brite repair at end of last season, now black stain

    I did try the vit c tablets in a sock, left it on for about 20 mins and after removing some of the black(very little) spread hit that eventually disappeared.
  19. M

    Diamond Brite repair at end of last season, now black stain

    Last year the pool was new , I had a rust spot near a light in deep end, at end of season they drained pool cut out rust spot and patched, now seeing pool first time this season I have what looks like black sand stains on the deep end floor underneath where repair was made. Scrubbing does...
  20. M

    New pool salt has been in a month now, numbers look ok?

    Cya was 80 ph 7.8 calcium hardness 425 alk 90
  21. M

    New pool salt has been in a month now, numbers look ok?

    FC 2.5 CC 0 TC 2.5 tested with TFP kit thanks
  22. M

    Quad de clean and recharge did I do it right?

    Roger that it's in the basement in a plastic tote thanks
  23. M

    Quad de clean and recharge did I do it right?

    I took out all filters and hosed them clean, i then added 8lbs of de cartridge powder as a slurry into skimmer the product I used is listed in link below https://www.amazon.com/gp/aw/d/B002WKK6WI/ref=yo_ii_img?ie=UTF8&psc=1 the reason I ask is because it's a different color (white) then what...
  24. M

    1 week down on new plaster pool, will be swg in 3 weeks, questions

    Still have two more weeks before I can go salt, just to clarify I did the test per the instructions and the water was very light red maybe pink on the CC test and one drop cleared it right up. Thanks a bunch this site is the bomb
  25. M

    1 week down on new plaster pool, will be swg in 3 weeks, questions

    Any advice on what to do next? What's does the Overnight test results show? thanks!
  26. M

    1 week down on new plaster pool, will be swg in 3 weeks, questions

    Morning test results FC 10.5 CC .5 i should not on both tests when I add the solution to get the water red again after the FC test , the water was pink or barley red . somwhat do these numbers mean am I good? And what do I do next?
  27. M

    1 week down on new plaster pool, will be swg in 3 weeks, questions

    Ok now we're cooking I understand hot to do the FC and CC test my evening results are FC 11 CC .5 report back in the am