Search results

  1. P

    Intex SF80110 Pump Low PSI on Filter Mode Only

    Thanks for the advice! No algae issues to speak of. I have not found any significant debris beyond the intex skimmer basket so it seems like that's been doing a good job. I checked and tightened all hoses and no issues there. I have not opened up the multiport yet, so I'll open that up and make...
  2. P

    Intex SF80110 Pump Low PSI on Filter Mode Only

    18x52 Intex XTR Pool with SF 80110 Pump has been installed for about 3 months. In the past couple of weeks the PSI has dropped off to approx 2.5 in Filter Mode only. If I switch to Backwash or Rinse, the PSI is still approx 6. I've checked the filter basket, impeller, intex skimmer and all pump...
  3. P

    Chlorinator after shocking

    Awesome, thanks, I'll check that out.
  4. P

    Slight leg lean in all the way around

    Yes, 12x12 patio blocks. It looks like the feet moved back slightly on the blocks during filling after 1 foot of water had been put in. From what I've read elsewhere it sounds like that is normal. I did go around while it was filling up to 1 foot of water and recenter/straighten any that had...
  5. P

    Chlorinator after shocking

    Hi there After setting up and filling our above ground pool I shocked it but apparently not everything else was quite in balance and free chlorine was zero. I shocked it again after balancing everything else out and now free chlorine is 10. I know I need to now wait for that to reduce below...
  6. P

    Slight leg lean in all the way around

    Hi there I have an Intex XTR 18 x 52 inch pool that I finally got put up after several weekends of leveling and prep. It's not perfect but it is under an inch out of level (approx 3/4). The only odd thing that I can't seem to find examples of people with the same issue is that all of the legs...