Search results

Good morning with an ambient temp of 38° now. Came out to one of my pools with a Raypak model #P-R406A-EN-C, serial #1412246332 that's usually close to 90° but is only at 80° now, I guess residual water temperature from constant heating because the display reads " sensor failure " and heater is...

Pool in question isn't the pool in signature. Dealing with AG 27ft pool approximately 7200 gallons. Was closed for 2 years. Had the op remove cover, drain swamp and clean the liner with brush and detergent and call me back after the refill. Well he called me back after pool went green so I'm...

One of my clients closed on a vacation home in Boca. I'm in search of a TFP kind of guy for their pool. Anyone you can recomend. I know everyone here on the forum does their own pool but maybe you have a contractor you approve of, Thanks.

Pool in question ISN'T pool in signature: IG 28000 vinyl, SWCG RJ-60PLUS, NG, AUTO COVER, Polaris Robot P955, 2019 Mid November close not by me, was done correctly and covered with mesh looplock. I had it up to slam level with LC right before close. fast forward....opening was yesterday I...

Was just thinking about the following after reading gizmos, noodles..... Does the gizzmo or jug or what ever is being put into the skimmer for winterizing, does it have to be tall to reach almost to the skimmer cover. I see pools with a deep skimmers and the jugs sit quite low on the bottom...

Disregard pool in signature: Friend's pool. The pool is 4 years old, vinyl, IG 20' X42' at approx 32000 gallons. 1.5 hp pump coupled with a Jandy CV460 cartridge filter, Delta E-40 Ultraviolet Sanitizer/Clarifier System, Raypack PR406AENC heater, automatic pool cover and a robot. No SWG...

Disregard pool in signature: Hi, Once again needing help. Finished the slam, all looks great, swg cell was shot and is being replaced with the propper cell size of 2X pool capacity. Problem: Checked the salinity of the water and it's a high of 4200ppm from previous owner, yes with the taylor...

Disregard pool in signature. Opened an IG APPROX 20,000 Gal vinyl pool which was closed for three years via TFP and passed the slam now with perfect water. The water was dark green and I couldn't have done it without the wonderful active forum which gave me all the incite needed just by reading...

The pool in question isn't pool in my signature. IG vinyl, approx 25000 gallons, 3 Jets ,1 Skimmer no main drain, 1 HP Super Pump, STA-RITE SYSTEM3 media filter model S8M150, AQUA RITE swg coupled with T-cell-9, PENTAIR 400K NG HEATER, MAYTRONICS DOLPHIN NAUTILUS CC PLUS ROBOTIC CLEANER Ok, so...

Pools in question are not the pool in signature: Have two pools in question, Pool #1 will be going over soon to SWG, it's vinyl and has a automatic cover with tracks below the coping with an above water header bar. Pool #2 is currently SWG from a few years back , is vinyl and does not have a...

Disregard pool in signature: friend's pool. The pool is 4 years old, vinyl, IG 20' X42' at approx 32000 gallons. 1.5 hp pump coupled with a Jandy CV460 cartridge filter,Delta E-40 Ultraviolet Sanitizer/Clarifier System, Raypack PR406AENC heater, automatic pool cover and a robot. No SWG. For the...

Disregard pool in signature: friend's pool. The pool is 4 years old, vinyl, IG 20' X42' at approx 35000 gallons. 1.5 hp pump coupled with a Jandy CV460 cartridge filter,Delta E-40 Ultraviolet Sanitizer/Clarifier System, Raypack PR406AENC heater, automatic pool cover and a robot. No SWG. For the...

Just uncovered my pool from the winter and here are the numbers. PH-8.2 or more FC-0 CC-0.5 CH-100 low TA-60 CYA-0 My first question is pH of 8.2 and a TA of 60. Do I attack the 60 and bring it up first or do I attack the pH 8.2 and bring it down and how's that going to affect my TA. For my CYA...

Disregard pool in signature: Was called to a friend's pool over the weekend to correct a cloudy condition. Have never been there so first order of the day was to pull out my TF-100 testing kit and run a complete test. The pool is 3 years old, vinyl, IG 20' X42' at approx 38000 gallons. 1.5 hp...

NOT THE POOL IN SIGNATURE Added DE to the sand filter today as per TFP 1 psi instructions. Water now looks like glass now but here is my dilemma. I just realized the instructions say to mix with water and pour into skimmer. I poured it one cup at a time into skimmer slowly but in its powder...

What I have here is a 24500 gallon vinyl pool with the following #s: FC=5 CC=.5 PH=8.2 TA =100 CH=275 CYA=40 I'm not sure where to go from here with the PH being high. What chemical agent can I use that won't effect anything else I probably can afford to drop my TA some and help myself on the PH...

Am I ready to slam or do I need to make an adjustment on one or several of the numbers. FC- 7.1 CC- 0 CH- 225 TA-150 CYA-30 My initial water test had a FC of 8.0 and I lowered it with a CLOROX ph reducer which was left over from last year. I know my TA is on the high side but maybe now that I...

First of all thanks to all moderators and members. Iv'e been lurking here daily almost to the point of addiction reading and acquiring a wealth of knowledge which brought me to the realization that there is no such a thing as a STUPID question. The more the TFP community interacts the more I...