Search results

  1. P

    Lots of tiny particles in water

    To try and get some quick, accurate and easy readings, I picked up one of these on Amazon for $12. Quick, easy and looks accurate so far: VIVOSUN PH Meter Digital PH Tester Pen for Water
  2. P

    Lots of tiny particles in water

    I added some MA and it cleared up. Thanks again.
  3. P

    Lots of tiny particles in water

    I put in the info and the result was a potential for scaling. It looks like the ph may be high since when I lower the ph the CSI was fine. Unless you have another thought, I will put in dome Muriatic acid tomorrow and see what happens. It is a new (water in 6/4/2020) pool and as I understand...
  4. P

    Lots of tiny particles in water

    When I used my dolphin last, there was some white substance that was picked up. Never happened before and not visible to the eye. I thought it was the stabilizer that caused this. I will check on the CSI
  5. P

    Lots of tiny particles in water

    Here is a recent set of test results using my Pentair Intechlor 40 run at 60%: Total Chlorine: 5.0 ppm Free Chlorine: 5.0 ppm Combined Chlorine: 0 ph: 8.0 ( muriatic acid added to reduce) Acid: 2 Total Alkalinity: 120 ppm Calcium Hardness: 375 ppm Stabilizer 50 ppm (stabilizer added to increase...
  6. P

    Lots of tiny particles in water

    Moved from here. I have a similar issue with small surface particles. I run a Pentair 200 for 11 hours around 50. I skim before going in to the pool. I am talking about some pretty small sediment being picked up in a fine skimmer. The pool cartridge is cleaned every week. I use a Dolphin T35 3...
  7. P

    AquaCal and Pentair IntelliCenter

    Not sure what it is attached to but it is working now as a "Gas" Heater. Thanks!
  8. P

    AquaCal and Pentair IntelliCenter

    I had an issue with my AqualCal Heat Pump starting up with the IntelliCenter. The "fix" was quite easy but not intuitive. The AquaCal is set up with a two pin communication wire which is recognized by the IntelliCenter when you make the interface with a GAS heater NOT a Heat Pump. This sets the...
  9. P

    IntelliCenter Home Automation Integration and Control

    Amazing work! Will this work with Android or is there a similar Android project? Thanks!
  10. P

    Intellicenter Help

    Nice talking with you R. You gave me a great "jump start" on how to use the web client. Thanks for your support!! Best! Phil
  11. P

    Intellicenter Help

    Let;s try to talk Friday. Thanks so much for your assistance! Best, Phil
  12. P

    Intellicenter Help

    Went to log in and got this: https://intellicenter.com/#/installations Nothing comes up and can not log in
  13. P

    Intellicenter Help

    PS...Have a great night! :)
  14. P

    Intellicenter Help

    I am just not getting this! ARRR Can you talk me thru this? Let me know and I will send you contact info for tomorrow or another day that works for you. Thanks! Phil
  15. P

    Intellicenter Help

    Finally was able to send the screen Thanks!
  16. P

    Intellicenter Help

  17. P

    Intellicenter Help

    Thanks I was able to get to this point. I do not see the pump: AUX-CIRCUITS (PANEL 1) FUNCTION SHOW AS FEATURE EGG TIMER SPA SPA NO 12H 0M LIGHTS INTELLIBRITE YES 12H 0M AIR BLOWER 1 GENERIC YES 12H 0M AUX 3 GENERIC NO 12H 0M AUX 4 GENERIC NO 12H 0M POOL POOL NO 12H 0M FEATURE CIRCUITS...
  18. P

    Intellicenter Help

    Some questions: 1. Do you do this done from the panel or can it be done from the desktop app? 2. When I go to the app on-line, I have under pools my pool and spa. 3. Under my pump view I have my VSF pump with current stats. I see no option to bring up the screen you are showing. I think my...
  19. P

    Pentair Controller Selection ... EasyTouch, IntelliConnect, IntelliTouch, IntelliCenter, SunTouch, etc ...

    I had a similar experience and it took a Pentair tech telling the company that Screen Logic is not for Intellicenter. All you need of course is a modem that works or direct connect. Have a sit down with your local Pentair Techs/reps.
  20. P

    Intellicenter Help

    Couple of questions: 1. I just had my Intellichlor start up and there is a communication failure. While I am still under warrantee, I was wondering if this might be a wiring issue. The company who installed the pool had some issues with the pump and WiFi resulting in a Pentair rep coming to the...
  21. P

    New Member from Florida

    The actual usage was greater than 18,000. The notice also came very quickly after the pool fill. I was somewhat surprised about the amount of water but knew it would be greater than what the anticipated use would be.
  22. P

    New Member from Florida

    Thanks! I was wondering about the valve config. It is "off" now for the pool and spa. Seems strange to not pull some from the bottom. Thoughts?
  23. P

    New Member from Florida

    Hi All! After living in my home for 36 years after the Live Oak tress I did not want to cut down to accommodate a pool starting dying (big limb loss fortunately away from the house), we decided to build a pool with sap (we always had a spa) and extend the patio area. After much planning and...
  24. P

    HI!

    After many years at my home and going thru a fiberglass in-ground and later free standing spa, I am at the end stages of having an in-ground pool and spa. I have an Pentair IntelliCenter installed with Pentair equipment with the exception of an Aquaqal LARGE heater. When seeking info, this blog...