Search results

  1. C

    Jandy NeverLube Valve

    Also a tip! If you find grit in your jandy valves, loosen them so you can move the handle past the stops and spin them 360° and the grit will be displaced.
  2. C

    Jandy NeverLube Valve

    Some closure on this. Had Red Rhino out and they found my leak on the main drain line right below the deck surface. I have a pavers on dirt so this explains the small pebbles and the back flowing of water...and the draining down. I'm having the pool remodel company fix the plumbing and the...
  3. C

    Jandy NeverLube Valve

    It’s pool finish. My valves are below waterline so a lot flows out when I take the valve apart.
  4. C

    Jandy NeverLube Valve

    I'm going to go clean it out right now and take some pics....I believe it's pool finish (tiny pebble sheen pebbles). It was redone last year.
  5. C

    Jandy NeverLube Valve

    Hayward Pro Grid DE filter...pic above.
  6. C

    Jandy NeverLube Valve

    I think I know why I'm getting grit on these valves. When the pump is shut off, water from the straining basket flows backwards through the valves and I'm thinking it's getting caught on the partially opened valves and closed valves...when the valves are reopened, the grit is resting on the...
  7. C

    Jandy NeverLube Valve

    Are you saying find the RPM that the skimmer pulls and holds dirt down and never go below that RPM? Back to original topic for a sec - how am I getting grit in the skimmer valve? This should be sinking to the bottom. Does this mean I have a leak? I'm getting some bubbles when the pump is...
  8. C

    Jandy NeverLube Valve

    Funny - I was just in the process of modifying this. I’m now trying 6-8am 3000rpm, 8am-sunset 1500rpm, sunset for 2 hours 2500 with spillover, 10-midnight 1500rpm.
  9. C

    Jandy NeverLube Valve

    Yes, I have a zodiac Z4. I can run with or without spillover, why do you ask?
  10. C

    Jandy NeverLube Valve

    Thanks! I'll get some ordered. My other battle is getting a good skim on my new VS pump, finding that right RPM that gets it done.
  11. C

    Jandy NeverLube Valve

    Hello all - love this forum - you guys are awesome! Just installed Jandy valves on my vacuum side about a month ago. I keep finding that they're getting full of grit when you turn them. I've opened them up once before and cleaned them out and they're starting to show some wear on the seals...
  12. C

    $100 to clean my filter?

    This is for a DE breakdown?
  13. C

    Jandy Actuator Question

    Hi All - I have moved into a home with a Zodiac Z4 with 2 Jandy Actuators to go from pool to spa. I'm up to speed on the actuators and all that happens and have even recently serviced them. I'm looking to solve an issue I'm not sure is possible. My spa is a spill over into the pool. In spa...