Search results

  1. F

    Need help with electrical design.

    Will do. Thanks again
  2. F

    Need help with electrical design.

    I decided to move away from UF-B cable. General consensus seems, that although allowed, they are really hard to fish thru conduits. I also found that many THHN labeled cables sold at big home improvement stores are in fact THHN & THWN rated. Looks like this is what I will use. Since they are...
  3. F

    Need help with electrical design.

    Thank you.
  4. F

    Need help with electrical design.

    I’m having hard time finding THWN-2 rated wire. Can UF-B wire be used in PVC conduit?
  5. F

    Need help with electrical design.

    Thank you both. Yes, my pump is 120 V, so if T103 can switch 2 hot wires, that’s perfect. Also good point on SWG load requirements. I couldn’t find that info on a manufacturer specifications, so while browsing thru manual I found given values but I didn’t realize it’s not at 120 V.
  6. F

    Need help with electrical design.

    No need to check on that, you made great point - timer override switch could be used to switch power off as needed therefor negating the need for separate switch. No, I don't want to timer to control outlets. I don't have a problem wiring SWG directly to timer but I would like to have pump plug...
  7. F

    Need help with electrical design.

    Thank you Allen. I read Mike Holt article you linked on someone else thread while doing my research. According to it, I would also need to install maintenance disconnect if I want to be up to code, correct? I'm also a bit confused if convenience receptacle must be also installed. If I go with...
  8. F

    Need help with electrical design.

    Hello I could use some expertise to help me choose the best way to wire my equipment. I have a 24' AGP with pump and filter located on a back corner of my yard. Originally I was planning to run 12 AWG THWN wire in PVC conduit 18 inches bellow the ground with twist lock receptacle connected to...