Search results

  1. K

    Autopilot Digital Tri-Sensor Leaking.

    Thank you. I'll take a look. I only see the screw holding the sensor, where is the nut?
  2. K

    Autopilot Digital Tri-Sensor Leaking.

    Opened up the pool, and fired up the pump. Seeing water leaking in small beads around the sensor. Is there a replacement seal? Something I can take apart and fix? Or do I need to order a new sensor. Thanks. Wanted to ask before taking it apart.
  3. K

    Clorox Pool Salt

    Crazy as I was about to buy this the other day when opening the pool. Read reviews on the Walmart site, and all stated the same issue. Definitely a product issue.
  4. K

    New Skimdoctor installed

    I have one of these, and been using it for over a year. I love it, causes a nice waterfall effect into the basket allowing it to skim the top of the pool very well. My float broke due to the concrete pad on top of the skimmer basket sinking. Been working great. Can open a close the flow a bit...
  5. K

    Pool Light GFCI tripping

    Looks like the older American Products fixture, looks exactly the same to mine that is tripping. No water in it, but it's causing the GFCI to trip.
  6. K

    LED or Incandescent???

    I am having this question right now, as my fixture is bad and tripping the GFCI. I diagnosed it down to the fixture from the housing. I was looking at the Pentair Intellibrite 5G 120V, but so many bad reviews with it failing in a year or less. Anyone have any opinions or longer term...
  7. K

    NJ Winter, lots of loose tile and coping

    Well the nightmare happened today when opening the pool. The NJ Winter and Long Freeze took a tole on the pool. I have lost tiles before, and just get new mortar and grout, and fix it up, This time the damage is way more extensive, and the Coping on top of the section is loose. I can pick it...
  8. K

    Broken Bottom Drains - Temp Fix Ideas

    SO we are having a party on Saturday, and the screws off both of the bottom drains are broken, so they need to be repaired - 10ft deep, and to deep for my belly to hold down and repair. SO... I was thinking..... Let me know if okay to do for temporary. Was thinking about putting...
  9. K

    Air in Pump Basket

    Have a Pentair Variable Speed Pump. At High Speeds I do not see any air in the basket. If I run at 1100-1500 RPM, I do see that there is Air in the Basket? Is this normal at lower speeds?
  10. K

    New SWG and Water Balance

    Good Evening all, FC: 9ppm ( due to shock ) PH: 7.5 TA - 90 CYA - 110 Salt - 4000ppm Borates 0 (until I put them in) Question, Below are the specs stated for TA and CYA. What are the effects if I leave the CYA at 110 with the SWG? The TA I can adjust by lowering the PH and Aerating, but...
  11. K

    Salt Levels High

    I drained some, since I was worried about the Ladder in the deep end and the ring around the light. I didn't pump out as much as originally planned. If I can get it down to about 4000ppm I will be happy. Will test it tomorrow to see where the levels are at. Thanks
  12. K

    Salt Levels High

    Pump out a whole bunch of water. Then refill with fresh water. I pumped out about a third of the pool this morning. Gave me some time to re-grout a few spots on the tile that needed it. So not a total loss of time. :)
  13. K

    Salt Levels High

    AHHHHHH, wonder if that would be it. I always used Bleach for the past few years. And Chlorine Tabs in the Hayward Chlorinator. I should have checked the Salt level before.
  14. K

    Salt Levels High

    Guess I should have, but thought it would have been 0 since I never added it before.
  15. K

    Salt Levels High

    Good Afternoon All, Well I just opened the pool and added the salt to the pool after setting up SWG. According to the Pool Calcs I have tried, I have between 39-44,000 gallons of water. So I went safe for 40,000. Well I added in all the Salt yesterday, and I added in 25 (40lbs) bags of...
  16. K

    Automatic PH Solution

    Was told that unless you order the Total Control Solution as a Package you can't upgrade or retrofit it. I just spent the money on the new System, and don't want to have to purchase a new Dig220 all over again to go with the Total Control. The Dig-220 in the Total Control package has a...
  17. K

    Automatic PH Solution

    Any Suggestions? Looking to place an order today. I was looking at ISIPOOL pH from Aqua Water Systems pH TEK System Hayward HCC 1000
  18. K

    Automatic PH Solution

    Well I have the Autopilot SWG, and wish I paid attention that the Total Control Solution can't be integrated unless I buy the other Power Unit. So since I am not doing that. I want to have something that Monitors the PH Level and Injects the Muriatic Acid automatically. What are some of...
  19. K

    Help - Plumbing Question and Jandy Valve

    Re: Finally Done :goodjob: Not sure why you decided to use 3 Jandy valves though :scratch: Wanted a way to adjust the incoming flows. I sometimes when doing a vacuum to waste close off the flow to the one port, otherwise it sticks to the bottom of the plaster, or collapses the hose. But...
  20. K

    Poolsmith CO2 pH: anyone using? Pro's? Con's?

    Bump on this message to see if anyone had any thoughts on this. I am looking into a PH Solution currently and this was one I came across. I am looking for Automated Solution that Probes and Injects as needed, What do you all recommend for Automated PH Solution
  21. K

    So you want to add borates to your pool--Why and How

    Having a hard time finding out where I can get Muriatic Acid from. When I search, all I find is the Diluted "Green" version? Any idea's on where to find it lately? Thanks
  22. K

    Loop Lock Cover Repair

    Afternoon all, Some of the Plastic on the underside of the LoopLock Cover is separating from the Black Out Cover. I want to sow this back together, has anyone ever done this? What is the Thread that is used? And Needle Size? Not sure if its all Canvas or Plastic.
  23. K

    Help - Plumbing Question and Jandy Valve

    Finally Done Guys, Thank you so much for all your help the past week. I finally got it all done. Just need to open the pool next week now, so I can do a leak test (Crossing Fingers) I really do appreciate all the help and suggestions you have all offered. This is a amazing site, and a...
  24. K

    Help - Plumbing Question and Jandy Valve

    I tried, Trust me I tried, Once the 90 is on, its sticks to far out. Question. I threw away the idea of the Union there, to just use the one on the Pump. So now I was thinking of installing 2 - Two Port Jandy Valves on each line to have a way for Winter Shut Off.
  25. K

    Help - Plumbing Question and Jandy Valve

    More Pictures- I guess another trip to Home Depot is in Order. [attachment=1:r5hcv19a]photo(2).JPG[/attachment:r5hcv19a] [attachment=0:r5hcv19a]image(2).jpeg[/attachment:r5hcv19a] Not sure why the photo rotated in the attachment. Sorry
  26. K

    Help - Plumbing Question and Jandy Valve

    So Take the 1.5" PVC to a 2" Union. Then Take the 90 off the Union to the Left and Right.. Extend the Piece off the First 90 Up High Enough so I can just use (2) 90's and tie in the Jandy then.
  27. K

    Help - Plumbing Question and Jandy Valve

    Afternoon, In the middle of cutting out the old plumbing and re-installation. I cut out a old Hayward 3 Port Valve that is bad. I bought a new Jandy 3 Port Valve. Issue is, the old Hayward Sat between the 1.5" Plumbing. The new Jandy Valve is Wider and doesn't fit between. HELP...
  28. K

    AutoPilot Digital and Variable Speed Pentair Pump

    Hey Guys, Gotta say you have been getting me through this project, but each day its something else that comes across my mind. In the Process of Wiring and Plumbing everything together. How would I set the pump on Off time if using the Autopilot Digital? Would I set it as a Single Speed...
  29. K

    Plumbing Question for SWG

    New Jandy Valve is sitting in the box. Going to cut out the annoying and frustrating Hayward Seized up valve.