Search results

  1. P

    2 HP super pump replacement options

    Thanks all. I am purchasing the replacement motor from Inyo as suggested.
  2. P

    2 HP super pump replacement options

    So I think I found the page (California Title 20 Compliant Pool Pumps & Motors - INYOPools.com), now I need to figure out which pump will be an equivalent replacement and a straightforward connection using 4 bolts. And also a list of other parts enclosing impeller that is needed to make an...
  3. P

    2 HP super pump replacement options

    Same here, I just need a pump to push water through DE filter. The robotic cleaner does so good job of cleaning that I didn't realize entire week pass by that my pump is not functioning anymore. This pentair pump will require some re-plumbing, would be better to find something that I can just...
  4. P

    2 HP super pump replacement options

    Thanks for the quick response. I did check Inyopools...closest I could find is this one which comes with a strainer part that I don't need. Also, not sure if this would be an exact replacement. http://www.inyopools.com/Products/02201182001139.htm The other option is to replace only motor which...
  5. P

    2 HP super pump replacement options

    Hello, The Hayward pool pump model sp1615-z-1-meg stopped working and humming, after few minutes circuit is tripping due to overheating. Not sure if it's worth the time to repair myself or get it repaired for significantly less cost than new one. I can't seem to find exact model replacement, so...
  6. P

    LEGACY R0453701 BYPASS ASSEMBLY, is this an important part?

    So I replaced the bypass assembly, now waiting for the utility company to turn ON gas and temperature rise measurement kit should arrive over the weekend also. I'll find out if it was a necessary part or not for my system. Though the outflow of water must be so intense that I doubt the tension...
  7. P

    Pentair Warrior SE - length of power cord and Aux power control

    So I continue testing, after setting up automation I ran once last night and cut the power before cycle completion. I created a schedule on smart outlet to turn on cleaner 8 am and turn off 10:30 am. It did clean the pool as expected in automation mode. I cleaned the filter and dropped cleaner...
  8. P

    Pentair Warrior SE - length of power cord and Aux power control

    So in my case, I can confirm that automation mode stays in the memory only if I schedule to kill the power anytime before the end of the default 2h cycle. It can be after few seconds or 1:55 mins, as long as power is killed during the cleaning cycle. Within 5 seconds of turning the power ON...
  9. P

    LEGACY R0453701 BYPASS ASSEMBLY, is this an important part?

    Thanks for the reply. I did read this section in the manual before posting to find out part number and it's purpose. Today I put request to the utility company to turn on my gas meter as well, apparently 2 week wait time. Once the gas is turned ON I'll test to find out how badly I need this part...
  10. P

    Pentair Warrior SE - length of power cord and Aux power control

    This is very helpful, I think this is it. My on/off schedule for the smart outlet is set up for longer than 2h, I'll try again like yours with under 2h schedule and find out if it works. I highly doubt Pentair would like to acknowledge that ~$20 smart outlet solution is as functional as their...
  11. P

    LEGACY R0453701 BYPASS ASSEMBLY, is this an important part?

    Hello, I got Jandy LRZ gas heater and I noticed water gushing out of Bypass Assembly so I opened it and found there is just plastic stick inside which I aligned it back to the opening and water leak stopped. Now I am checking parts diagram online and it seems I am missing a spring and some kind...
  12. P

    Pentair Warrior SE - length of power cord and Aux power control

    Thanks for the quick reply. If it's working for you then I must be doing something wrong, I'll troubleshoot more. So what's your smart plug schedule like? Is your smart plug scheduled to turn off before default 2h cycle finishes or you wait longer than 2 h so cleaner default cycle is complete...
  13. P

    Pentair Warrior SE - length of power cord and Aux power control

    Hello, I also tried automation mode as spelled out by "jphaus" for Warrior SE. Are you able to keep cleaner in automation mode after the first cleaning cycle ends or the automation mode works only for one time when power is supplied to the cleaner and you have to repeat steps to set automation...
  14. P

    Pentair Warrior SE - length of power cord and Aux power control

    Hey there, I also got Warrior SE also, I tried activating automation mode as you suggested which worked for me only for the first round of cleaning once power is applied. It won't start the cleaning cycle next time when power is turned on, is this the case for you as well? How do you keep in...