Search results

  1. P

    LED Lightning review

    How much coverage did the microbrites provider how far across the pool and how far side to side? thanks
  2. P

    Pool Lights Coverage and Type

    @ajw22 like this? thanks
  3. P

    Pool Lights Coverage and Type

    @ajw22 thank you what is your opinion of using a color LED microbrite for lighting the 6 ft convex curve waterfall (photo 2 area)? The only option is flush to the wall underneath horizontally facing out (we have no bench or bump out to have it face up and its the deep end) or on the side wall...
  4. P

    Pool Lights Coverage and Type

    Hi @bdavis466 Its a pentair Magicfalls waterfall 6 feet custom convex curve that will be mortared into the pool wall under the coping. It will have turquoise glass tile behind it. There is a color led intellibrite near by (shown in photo) but with the convex shape most likely wont provide...
  5. P

    Pool Lights Coverage and Type

    The waterfall is going to go on the convex curve in the photo (pool 2). Should I put a microbrite on the pool wall under the waterfall? I want the waterfall to be seen at night. Im not sure the best way to accomplish that nicely. Thanks
  6. P

    Use of actuators for water features

    Hi I just found that error you mentioned thanks (the names are similar) It is INTELLITOUCH I9+3 PERSONALITY KIT 521221 with power center and screen logic
  7. P

    Use of actuators for water features

    Yes the intellitouch with power center and screen logic will cover 5 pumps. Its a i9+ 3 and expandable. Purchased 2 VSPs already- own the whisperflo from old set up (was told to buy one more VSP) 3 HP VSP 4 bubblers and 4 deck jets (will have two 2" bypass) 3 HP VSP 6' waterfall and 2 laminars...
  8. P

    Use of actuators for water features

    @MyAZPool I read you had some insight on this and with the new actuators and automation more may be possible (please read through my initial post ) thanks!! @jblizzle I will not be running all the features/pumps all the time. Only when we are using the pool. I didnt get any guidance and had...
  9. P

    Use of actuators for water features

    No, here is the planned set up: We want to be able to run each set of features independently. Thanks
  10. P

    Use of actuators for water features

    @Jimrahbe @Bama Rambler @mknauss
  11. P

    Use of actuators for water features

    Hello I am trying to plumb 4 bubblers and 4 deck jets on one 3 HP Intelliflo VSP. In order to have the bubblers work independently from the deck jets the plumber says I need TWO Pentair 521485 IntelliValve Valve Actuators (they are listed as setting just the right amount of flow for two water...
  12. P

    Pool Lights Coverage and Type

    @ajw22 @bdavis466 thanks for your help! How far will they shine? If they are on the back wall, the pool is about 19 across. Will they light all the way across the pool? we have stairs on the other side, Im wondering if I place the lights on the pool wall as pictured across from the stairs...
  13. P

    Pool Lights Coverage and Type

    The pool is on the side of the house so it only hits a few windows. Plus we plan to leave them off unless we are using the pool. However, the light would face the spa and we dont want to be blinded (though it would be color and a darker color may solve this). Will intellicenter be able to turn...
  14. P

    Pool Lights Coverage and Type

    @bdavis466 ?
  15. P

    Water Feature plumbing help needed PLEASE :)

    Hi I just met with the plumber and he labeled it. What do you think about safety? thanks
  16. P

    Radius of a convex curve for a waterfall

    Yes when i continue the height measurement to the other side of the circle it is about 14 ft 2 in approx. Thank you very much!
  17. P

    Pool Lights Coverage and Type

    Doing a remodel. The pool had one light (pictured) and we are replacing the light (Pentair intellibrite LED color). We were told that the light wont be enough to cover the pool (white plaster/20X 40) with 4 LED color bubblers on the new baja shelf. Our only options to add would be another color...
  18. P

    Water Feature plumbing help needed PLEASE :)

    Yes we are going to add two 3inch lines to the right of or near the return on the right of the photo. Its for the waterfall. Im most worried about hair getting sucked in or little kids being sucked to it (safety to prevent drowning/injury). Will any cover work for this? are there flat ones as...
  19. P

    Water Feature plumbing help needed PLEASE :)

    Thank you. No there isnt 3 feet below the water line. Therefore, im going to have them turned into returns. Two will be unused (saved for later incase we decide to do solar heat) and two will be bypass/blow off for the deck jets so they can be used alone without the bubblers as they will share a...
  20. P

    Radius of a convex curve for a waterfall

    Hello, I am trying to figure out the radius of this convex curve on my pool that I plan to put a waterfall on. Did I do this measurement correctly? Please see photos? Thanks
  21. P

    Water Feature plumbing help needed PLEASE :)

    the two on the left are suction lines and they are 3 feet apart but the placement on the wall isnt safe they are too high up I think? (multiple 3HP VSP's). If they are, isnt this unsafe? what do you think can be done at this point? Im thinking they need to be changed to a skimmer? I think the...
  22. P

    Water Feature plumbing help needed PLEASE :)

    @mas985 thank you for your reply. Pentair said I can use the 2" line. However, they said I needed more suction and when I mentioned where the suction was it brought up a red flag. I think these are suction lines and they shouldn't be in the wall and so high up and close together. I think this...
  23. P

    Water Feature plumbing help needed PLEASE :)

    Newbie remodeling an old pool and have had a lot of issues. Please Help. 40 X 20 pool (incudes new 8X20 baja)plus a large attached spa In pool: Two 2” suction lines Two 2” return lines Run to 6” waterfall is approx. 90 ft Run to laminars is a little less but not by that much Pumps 1 whisperflo...
  24. P

    Baja Shelf In Pool Lounger

    I tried a ledge lounger in a store today and it was so uncomfortable. Ive been searching for an alternative. Water height approx. 9/10 in. What have you used or seen other than the ledge lounger or the exact copies? Thanks
  25. P

    Shotcrete Concerns

    Yes rebar was added for the baja as well as a section of the shallow end to change the slope.
  26. P

    Shotcrete Concerns

    I am doing a remodel (extended the pool to add a baja and leveled the pool floor slope a little). The shotcrete was done and I wasn't given any instructions. Three days after, I read that it was supposed to be kept wet to cure. I verified with the contractor and on the 4th day started watering...