Search results

  1. K

    Installing inground pool liner for 18x36

    The pool floor isn't totally smooth anymore. Can I fix this with pool krete or do I leave it alone? If not pool krete, how do I fix the it?
  2. K

    Installing inground pool liner for 18x36

    Thank you. My pool drained it’s self over the winter months.
  3. K

    Installing inground pool liner for 18x36

    The pool is empty. I plan to buy all new gaskets and one of my returns plate is cracked so i will buy new ones. I watched pool warehouse videos to install and measure which I plan on doing tomorrow. What do you mean by line up the seams? Do you mean make sure the same seam is exactly across the...
  4. K

    Installing inground pool liner for 18x36

    Has anybody installed their own pool liner? For inground pool. I have watched a lot of videos and it doesn't seen all that bad. Can anyone that has done it give me any advise that you would think would help. Errors you made, how not to make errors ect... Is it possible, can it be done?? A...
  5. K

    1.5 HP pump

    will a bigger HP pump make it work?
  6. K

    1.5 HP pump

    I don't think so it's all underground.
  7. K

    1.5 HP pump

    No, I only have the slide valve and the 2 valves at the pump pad.
  8. K

    1.5 HP pump

    I will add picture when I get home from work. The system has valves to direct water to the skimmers only, or the bottom drain only or open them both to run it all. The slide doesn't run constantly. There is a valve at bottom of slide I pull out when I want the slide to run.
  9. K

    1.5 HP pump

    That I do not know. It was trashed before I could figure out the size.
  10. K

    1.5 HP pump

    Hello, I was wondering if someone can help me. Last year I noticed my pump was cracked. So we bought new one without noting the size of the old one. Stupid I know. I have a slide that requires water pressure to work. It worked perfectly before the pump change over. I bought a 1.5HP pump. The...
  11. K

    Pool slide inground pool

    where would the adjustment valve be? The only thing I ever did was open a gate valve and It worked. I trashed my old pump so I don't know the hp power but I thought I bought the exact replacement. I did however block one of the return jets and it worked fine. However I have never had to do...
  12. K

    Pool slide inground pool

    Does anyone know what would cause my slide not to have enough pressure to push water up slide? I'm wondering if I replaced the pump with the wrong size. It used to work with old pump.
  13. K

    Just getting started in opening a green pool. New to this method

    Even with my CYA of zero. I just bought some stabilizer at lunch time and I'm going to put in tonight when I get home.
  14. K

    Just getting started in opening a green pool. New to this method

    ok, well I was doing this all wrong before I decided to come here and print and read. Lower the PH Get stabilizer in there. slam As it needs attention every hour on the hour I need the weekend to start. If I put the stabilizer in starting today, which is Thursday, can I start slamming on...
  15. K

    Just getting started in opening a green pool. New to this method

    Ok so 9lbs of stabilizer. You say granular, should I be putting in skimmer? Also Is my PH too high, should I lower it?
  16. K

    Just getting started in opening a green pool. New to this method

    Hello everyone I took my cover off last weekend and started the process. I purchased the TF-100 test kit and here are my numbers FC 6.5 CC 1 CYA didn't show up on my test so I assume Zero. When I mixed the drops with the water it never turned cloudy and never covered the black dot on bottom of...
  17. K

    Pool will not clear, greenish blue!

    I have thrown many many gallons of bleach in and it just won't clear up. I just got my test kit and found out I have zero calcium in my pool! Is this my problem and what is the easiest solution? I have inground 20/40 , sand filter pool. It did start out very very green, and full of leaves.