Search results

  1. M

    Hayward/Goldline Pro-Logic panel schematic? No power to display!

    I gave up and replaced the main board. Weather was quite hot here and I that pro logic sure makes life easier!
  2. M

    Hayward/Goldline Pro-Logic panel schematic? No power to display!

    Did some more troubleshooting today, from what I see there is no DC voltage whatsoever on the board. No DC voltage on the board that I could find, nothing to the latched drivers as well (U4/U5). If I disconnect the two external rectifiers outputs, I measure ~6V AC on the orange terminals but...
  3. M

    Hayward/Goldline Pro-Logic panel schematic? No power to display!

    I did not see anything burnt anywhere, including the backside. I doubt that the issue would be with the relay K! however since my problem is with the display panel, it does not get any power. I would be surprised if this was controlled by the display panel. Do you know where the 10V DC...
  4. M

    Hayward/Goldline Pro-Logic panel schematic? No power to display!

    My PL-P-4 panel died overnight. No power to the display and from what I was able to gather from this https://www.hayward-pool.ca/pdf/manuals/2014-ProLogic-4.45v2-TSG.pdf my 24V AC is fine, 120V AC supply to the panel is fine, fuses aren't blown however there is no DC voltage between pin 1 and...
  5. M

    Max "overhang" for concrete pool deck (vinyl pool)

    Woops, I've just realized that my reply never made it. THanks for the info Jason, I thought that the deck was mostly supported by the brackets since they are called "deck support" when you look at the Kafko litterature (My pool isn't kafko but similar)
  6. M

    Max "overhang" for concrete pool deck (vinyl pool)

    I've had some issues with the concrete deck near my diving board. It was installed with a sonotube to offer extra support but it appears that because of it the concrete was lifting with the frost thus it cracked pretty badly. The poolbuilder offered to fix this and work is now in progress as...
  7. M

    Solar Covers and size

    Get a good roller and it shouldn't be too hard. I like the rocky roller.
  8. M

    SR Smith "Salt friendly" diving board: worth the upgrade?

    Re: SR Smith "Salt friendly" diving board: worth the upgrade What bugs me a bit about it is the fact that they only give a 3 years warranty.. and it's prorated! I hope it's not because the fiberglass will dry / crack over a short period of time
  9. M

    SR Smith "Salt friendly" diving board: worth the upgrade?

    Re: SR Smith "Salt friendly" diving board: worth the upgrade Thanks a lot for the info. Hmm, no metal at all for the spring or the base, that's making interesting.. It looks like I may have to bite the bullet and get this one instead of keeping the Frontier II. I should have been more...
  10. M

    SR Smith "Salt friendly" diving board: worth the upgrade?

    Re: SR Smith "Salt friendly" diving board: worth the upgrade Friendly bump.. any thoughts ?
  11. M

    Rust on diving board base: how to remove & prevent?

    It looks like I never updated this thread so I'll do it for those who may be searching for a similar issue in the future. I ended up having a new base (provided by pool builder) sprayed with black rhino hybrid and it looks quite nice. It has lasted all summer without any issues...
  12. M

    SR Smith "Salt friendly" diving board: worth the upgrade?

    I had posted last year about the rust issue on my Frontier II diving board rust-on-diving-board-base-how-to-remove-prevent-t25474.html and ended up having it sprayed with "rhino hybrid". It works well so far, no rust or anything but I have no idea when ti will start cracking and I may be back...
  13. M

    Coping and concrete issues... not too sure what to do

    Thanks for the torque lock thingy, maybe it could be part of the solution I need. The pool builder sent a guy yesterday and he agreed that just patching the crack may not last long. He said that something like rubber / epoxy coating may be better since it will never crack but my concern is...
  14. M

    Coping and concrete issues... not too sure what to do

    Final bump just in case anyone has any recommendations..
  15. M

    Air coming through return

    It should stay full, maybe you've got a minor leak (I'd say check the multiport valve to see if it's sending water down the backwash hose)
  16. M

    Wildlife issue

    Yes, it's much better in your plate than in your pool! Un petit civet de lapin? :cheers:
  17. M

    Not enough room to refill sand filter to recomended weight

    Re: Not enough room to refill sand filter to recomended weig blow compressed air in there?
  18. M

    solar cover - major PIA?

    Get a good roller and anchor it in concrete. I like the rocky rollers
  19. M

    New grill, not prone to flare-ups. Please recommend.

    Keep a spray bottle nearby.. or get a big green egg and don't look back (plus, I think you could cremate a body in there..)
  20. M

    Coping and concrete issues... not too sure what to do

    Re: Concrete issues... not too sure what to do Yeah I know but since we're in pool opening season my post was falling at the bottom of the list so I figured that a bump wouldn't hurt. A bit premature maybe but the part of me that worries about stuff wants to know how to deal with it to simply...
  21. M

    Coping and concrete issues... not too sure what to do

    Re: Concrete issues... not too sure what to do <taps microphone> hello? anyone here? <taps microphone> :P
  22. M

    Coping and concrete issues... not too sure what to do

    My pool was installed in the fall of 2009 and I live in Ottawa where it gets Dang cold in the winter so frost is an issue. As expected, I had a few cracks in my concrete that appeared last year and a bit of spalling here and there, one spot was near the shed so not a big deal (wasn't broom...
  23. M

    Can I partially cover my pool?

    A cover won't raise temperature, it will simply make it drop less. I'd get a 12 x 40 with a roller and start rolling in the deep end.
  24. M

    My AGP Build up in the great white north-Hot Tub & Deck*NEW*

    Re: My AGP Build up in the great white north-New DeckBuild P what the ****, you're in saskatoon and the pool is already running while here in ottawa we're freezing our asses with rain this week !
  25. M

    Fastest way to add large quantities of CYA?

    The sock technique in front of a return is great. If it's a cheap sock, you come back to a pool full of granules and an empty sock. Been there, done that.
  26. M

    Equipment Placement

    Why not route gas + electrical main through the house crawl space / basement / or whatever you've got down there so that it reaches the other end of the house? That's what I did for my gas line
  27. M

    how close is too close for chlorine barrel next to heater?

    Re: how close is too close for chlorine barrel next to heate Man I wish I had thought about that big pan like you have. That would make my life much easier in the shed because sometimes water comes in bu the chimney during really windy storms. Hmm, maybe I could put a small one under the heater.
  28. M

    Why are there worms in my pool?

    It's your neighbour, he doesn't want them in his garden so he tosses them in your pool!
  29. M

    Question about top rail removal

    If you do end up trying his theory, please make sure to set up a video camera just in case 8-)
  30. M

    Renting My House (with pool)

    The pool should be the least of your worries, it's much cheaper than the house! :shock: I could never rent, I know they wouldn't take care of everything the way I want, unless it's someone you know.