Search results

  1. C

    Waterfall Actuator Not Actuating - Pentair Easy Touch

    I swapped the connections in the controller (much easier than swapping the actual actuator due to how the installer ran the wires), switching the waterfall with the spa actuator). The problem followed the actuator. Since the motor turns in one direction, I lean toward thinking it is the small...
  2. C

    Waterfall Actuator Not Actuating - Pentair Easy Touch

    Nothing happens when I flip the switch
  3. C

    Waterfall Actuator Not Actuating - Pentair Easy Touch

    I have an Easy Touch controller and a waterfall circuit that has worked fine since the pool was new (6 years). Today the actuator stopped working. I figured a bad limit switch, as I've had to replace these in my other actuators, but that isn't the problem. Tested both switches and they work...
  4. C

    Need to fix stamped concrete deck...

    Here are a couple of pics. In two of them you can see what I'm talking about - where the color has pretty much disappeared.
  5. C

    Need to fix stamped concrete deck...

    We had our fence re-stained this past year, and the contractor got over-spray all over our stamped concrete pool deck. They attempted to use some mild cleaner on is and in the process stripped out some of the color. So, now I'm left with having to fix the mess and need some guidance. The deck...
  6. C

    Pentair IC40 Comm Link Error

    UPDATE - the IntelliFlo pump shows "Display Not Active", so the com port is working, presumably. Also, I went into the IntelliClor settings and cranked the % up to 100% to see what happened. The LEDs on the salt cell changed to reflect the new setting from the controller. So, The controller...
  7. C

    Pentair IC40 Comm Link Error

    Thanks. I'll check out the pump when I get home.
  8. C

    Pentair IC40 Comm Link Error

    I have a 3 year old pool with the Pentair IC40. Until last week, it has worked without problems. When I go to the diagnostics menu on the Easy Touch control panel or wireless remote, I can the Comm Link Error and 0 ppm. I pulled the IC40 off and cleaned this weekend, but no change in status...