I really should have used my robot for this but I wasn’t thinking. Unfortunately a fairly large amount was at the bottom of the pool and I swept it to the main drains expecting it to get sucked into the filter so I could use my shop vac to get it out but when I pulled my cartridges out there didn’t seem to be all of the sand that was sucked up so I am concerned it’s sitting in the plumbing lines probably around angled fittings. It doesn’t seem to be causing any issues with pressure but my ADD is kicking in and I feel like I need to do something. I have seen these “drain bladders” that you can attach a hose to and it pushes out with water pressure and can be inserted into the pump basket area and I can switch to main drain only so it pushes back the other way but since there isn’t actually a clog not sure it’ll do much.
Thanks.
Thanks.
