PH/TA and Borates

Jump to latest Follow Reply
U

Uhhello

Well-known member
May 23, 2022
171
Tucson
Pool Size
10500
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Hayward Aqua Rite (T-9)
As you can see from my logs, trying to get my TA down to prep for borates. If I read everything right, I want my TA to be 70-80 and then add the borates right? I got the granular stuff from Dudadiesel. I'm down to 7.0 PH and am aerating using a utility pump and hose.
Additionally, why doesn't my pool math app log the CSI? It has no checkmark or ability to save it when I enter water temp and borates. Am I doing something wrong?
 
Do you have Tracking Water Temperature, Borates, and CSI ON in the Settings? I assume you are using the Premium (paid) version of the app.

There is no real reason you need to lower the TA. Thought it is faster to achieve before adding borates.
 
mknauss said:
Do you have Tracking Water Temperature, Borates, and CSI ON in the Settings? I assume you are using the Premium (paid) version of the app.

There is no real reason you need to lower the TA. Thought it is faster to achieve before adding borates.
Click to expand...
Track CSI is on in my settings. So I can add and then just gradually bring down TA? Thanks.
 
  • Like
Reactions: Newdude and Texas Splash
So from reading the above, you can't keep a history of CSI readings? I have Track CSI enabled but nothing shows that I can see other than when I specifically check it, it doesn't show in my logs.
 
Uhhello said:
So from reading the above, you can't keep a history of CSI readings? I have Track CSI enabled but nothing shows that I can see other than when I specifically check it, it doesn't show in my logs.
Click to expand...
It will.

You need to have "Track CSI" enabled and "Track Temperature" enabled. You must have at least one temperature reading recorded in the logs. The CURRENT CSI, to be accurate in your log, must have a current pool temperature logged, otherwise it uses the last temperature logged (which may be inaccurate, hence your CSI will be inaccurate without a current temperature logged).
 
  • Like
Reactions: Uhhello

Enjoying this content?

Support TFP with a donation.

Give Support
You must log in or register to reply here.
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.
Top Bottom
Back
Jump to latest Follow Reply