Jandy lights question

RodB · Jun 4, 2022

Just got power to my new build testing lights, all lights were blue which is what I was told should happen. One light stayed white. Anyone have any ideas?

Thanks
Rod

Poolbreh · Jun 4, 2022

Not familiar with jandy but they all have synchronized colors. On off changes to the next color and every brand has a different color order. Your lights may not be synced. Do you have the aqua link? Let’s see if @PoolGate knows how to walk you through syncing them.

PoolGate · Jun 4, 2022

https://www.jandy.com/-/media/zodia...revb.pdf?rev=9d8020cacc7748138bba2d56ccaa4715 - page 10

6.2 To Reset to the Beginning of the Color Sequence Turn the light OFF, wait four (4) to five (5) seconds, then turn ON, the light will return to the beginning of the color cycle (Alpine White). NOTE If an AquaLink® RS control system is being used the color set can be selected using the indoor controller. NOTE To synchronize colors on multiple Jandy Pro Series WaterColors RGBW LED Light systems wired to separate switches, perform the above actions on all of their switches simultaneously. All Jandy Pro Series WaterColors RGBW LED Lights will synchronize automatically if activated by the same switch. No other accessories are required.

RodB · Jun 4, 2022

Poolbreh said:
Not familiar with jandy but they all have synchronized colors. On off changes to the next color and every brand has a different color order. Your lights may not be synced. Do you have the aqua link? Let’s see if @PoolGate knows how to walk you through syncing them.

Yes on the aqua link.

Search

Jandy lights question

RodB

Poolbreh

PoolGate

RodB

Similar threads