watched a installation vid and it seemed easy enough, almost to easy. Was wondering if anyone has had experience with the core series. Also the warranty at 7 years seems a lot longer than other brands
circu pool core series swg
- Thread starter REBARBEE
- Start date
Few folks on here have the core, very easy to install.
I think the only down side is it didn’t have a lot of power incriminates but I don’t think you need them. My edge has 8 and I stay around 30% or 60% ish.
Discount salt had a installation video last time I looked, I bought the edge in early 2020 but almost got the core
I think the only down side is it didn’t have a lot of power incriminates but I don’t think you need them. My edge has 8 and I stay around 30% or 60% ish.
Discount salt had a installation video last time I looked, I bought the edge in early 2020 but almost got the core
ArsenalFan
Silver Supporter
- Jan 29, 2021
- 53
- Pool Size
- 18250
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool Core-55
I installed my Core 55 myself and added a flow meter. 25%-50% settings are perfect using a timer to to make sure it comes on after the pump and turns off prior to the pump.
Finally passed overnight test, lost pool while making adjustments to swg, got the sock with cya in front of jets shooting for 55-60 up from 40, think I'm supposed to run the swg at 35% for 10 1/2 hours to stay 7 and 9 ppm of fc. I'll worry about other tests after get this adjusted, thanks for all the help.
Once you get dialed in you will love it, just watch your FC as your water gets warmer and learn from my mistake and don’t try the minimum levels
After slamming, had several cloudy days so it's taken forever for fc to drift down, guessing in the morning it should be around 7 to 8 , then I'm going to start dialing it in , experiment some, any recommendations on how often to test fc to make sure it adding or maintaining not losing fc,still bring ta down its now at 100, thanks
Similar threads
