We just bought the house and found we have these lights in the pool and spa. I cant seem to find a controller anywhere for color, but read that you can control them by turning lights on/off for set times. I cant seem to get that to work. I was thinking about buying the controller, but was also wondering if I would be able to control through easy touch using screen logic.
J&J Colorsplash XG Lights - Controlling with Easy Touch 8
- Thread starter bhollehday
- Start date
- Jul 21, 2013
- 52,260
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
You should set the lights to IntelliBrite in the ET.
@Jimrahbe can help with the ScreenLogic stuff.
From page 8 in https://www.poolsupplyunlimited.com/Products/Manuals/143330_2017106175925.pdf
COLOR SPLASH XG SERIES LED ENHANCED FUNCTIONALITY WITH CERTAIN PENTAIR® AND JANDY® AUTOMATION SYSTEMS.Certain Pentair® and Jandy® automation systems have a mode setting for controlling “Pentair IntelliBrite® 5g LED Color” light fixtures. This setting can also be used to operate Color Splash XG Series LED light fixtures. When the Pentair and Jandy automation system is set to “IntelliBrite” mode, users will NOT see XG series proprietary colors and show names displayed on the control screen. (See J&J’s cross reference guide to assist users with selecting XG Series light shows and colors on automation systems set to “IntelliBrite” mode.)NOTE:J&J’s Color Splash XG Series LED Pool and Spa light fixtures will not synchronize with any other manufacturer’s pool or spa light fixtures
Warning!Color Splash XG Series LED lighting is NOT compatible with the Pentair®IntelliBrite® Controller (Part Number: 600054). Installation of J&J’s XG series LED light fixture with an IntelliBrite controller will permanently damage the J&J light fixture and VOID J&J’s warranty
@Jimrahbe can help with the ScreenLogic stuff.
From page 8 in https://www.poolsupplyunlimited.com/Products/Manuals/143330_2017106175925.pdf
COLOR SPLASH XG SERIES LED ENHANCED FUNCTIONALITY WITH CERTAIN PENTAIR® AND JANDY® AUTOMATION SYSTEMS.Certain Pentair® and Jandy® automation systems have a mode setting for controlling “Pentair IntelliBrite® 5g LED Color” light fixtures. This setting can also be used to operate Color Splash XG Series LED light fixtures. When the Pentair and Jandy automation system is set to “IntelliBrite” mode, users will NOT see XG series proprietary colors and show names displayed on the control screen. (See J&J’s cross reference guide to assist users with selecting XG Series light shows and colors on automation systems set to “IntelliBrite” mode.)NOTE:J&J’s Color Splash XG Series LED Pool and Spa light fixtures will not synchronize with any other manufacturer’s pool or spa light fixtures
Warning!Color Splash XG Series LED lighting is NOT compatible with the Pentair®IntelliBrite® Controller (Part Number: 600054). Installation of J&J’s XG series LED light fixture with an IntelliBrite controller will permanently damage the J&J light fixture and VOID J&J’s warranty
B,
As an example.. If you have Aux 1 set up as Pool light, then you need to change the circuit Function to "IntelliBrite"..
You will also have to set up the special lights box...
Thanks,
Jim R.
As an example.. If you have Aux 1 set up as Pool light, then you need to change the circuit Function to "IntelliBrite"..
You will also have to set up the special lights box...
Thanks,
Jim R.
So it looks like I dont have the intellibrite option. I only have SAM and SAL. Also not sure what to do in the special lights box.
- Jul 21, 2013
- 52,260
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
How old is your EasyTouch? You may need a firmware update to get support for the IntelliBrite lights.
B,
Look at the 2nd page of the set up app and you should see this.. Tell us what Controller Firmware you have..
Thanks,
Jim R.
Look at the 2nd page of the set up app and you should see this.. Tell us what Controller Firmware you have..
Thanks,
Jim R.
B,
Way old F/W... ☹
I suggest that you PM Tom, at ogdento and see what he says..
Thanks,
Jim R.
Way old F/W... ☹
I suggest that you PM Tom, at ogdento and see what he says..
Thanks,
Jim R.
Would this be the how-to? I'm familiar with firmware updating and programming..think I could tackle it with the right info.
www.troublefreepool.com
How to perform firmware upgrade on Pentair* controllers
Pentair* Controllers; EasyTouch versions 1.0XX and 2.1XX, iLink version 1.0XX, Intellitouch version 1.1XX, Mobi version 2.1XX, and Suntouch version 2.0XX Please verify that your programming port matches the picture in this thread. Note - Pentair sells a kit P/N 520957 for $559.95 to perform...
www.troublefreepool.com
B,
Talk with Tom.. You need all the right equipment and files... He can tell you if you have all the right stuff.
And if nothing else, you guys can talk in that secret code that you guys use...
Calling @ogdento
Thanks,
Jim R.
Talk with Tom.. You need all the right equipment and files... He can tell you if you have all the right stuff.
And if nothing else, you guys can talk in that secret code that you guys use...
Calling @ogdento
Thanks,
Jim R.
486579207468616e6b73204a696d2c20756e666f7274756e6174656c792068697320626f61726420697320616e2045617379746f756368203120616e642063616e2774206265207570646174656420746f20746865206c6174657374206669726d77617265
Aw Crud that's secret code... here it is in plain english...
Hey thanks Jim, unfortunately his board is an Easytouch 1 and can't be updated to the latest firmware
At this point the only options are to buy a separate stand-alone controller or swap in a new Easytouch 2 board
Aw Crud that's secret code... here it is in plain english...
Hey thanks Jim, unfortunately his board is an Easytouch 1 and can't be updated to the latest firmware
At this point the only options are to buy a separate stand-alone controller or swap in a new Easytouch 2 board
And in Binary:
01001000 01100101 01111001 00100000 01110100 01101000 01100001 01101110 01101011 01110011 00100000 01001010 01101001 01101101 00101100 00100000 01110101 01101110 01100110 01101111 01110010 01110100 01110101 01101110 01100001 01110100 01100101 01101100 01111001 00100000 01101000 01101001 01110011 00100000 01100010 01101111 01100001 01110010 01100100 00100000 01101001 01110011 00100000 01100001 01101110 00100000 01000101 01100001 01110011 01111001 01110100 01101111 01110101 01100011 01101000 00100000 00110001 00100000 01100001 01101110 01100100 00100000 01100011 01100001 01101110 00100111 01110100 00100000 01100010 01100101 00100000 01110101 01110000 01100100 01100001 01110100 01100101 01100100 00100000 01110100 01101111 00100000 01110100 01101000 01100101 00100000 01101100 01100001 01110100 01100101 01110011 01110100 00100000 01100110 01101001 01110010 01101101 01110111 01100001 01110010 01100101
Hahaha
I think im going to just buy the intellitouch system. I already spent $400 on screen logic, and $1100 on IC40 and PC100. I might as well return it all (Still can), and buy the intellitouch 521905 for $2k here which has everything I need. It has everything I need for salt cell, and iPhone control:
And then probably sell the easy touch for $300 or something, right?!
01001000 01100101 01111001 00100000 01110100 01101000 01100001 01101110 01101011 01110011 00100000 01001010 01101001 01101101 00101100 00100000 01110101 01101110 01100110 01101111 01110010 01110100 01110101 01101110 01100001 01110100 01100101 01101100 01111001 00100000 01101000 01101001 01110011 00100000 01100010 01101111 01100001 01110010 01100100 00100000 01101001 01110011 00100000 01100001 01101110 00100000 01000101 01100001 01110011 01111001 01110100 01101111 01110101 01100011 01101000 00100000 00110001 00100000 01100001 01101110 01100100 00100000 01100011 01100001 01101110 00100111 01110100 00100000 01100010 01100101 00100000 01110101 01110000 01100100 01100001 01110100 01100101 01100100 00100000 01110100 01101111 00100000 01110100 01101000 01100101 00100000 01101100 01100001 01110100 01100101 01110011 01110100 00100000 01100110 01101001 01110010 01101101 01110111 01100001 01110010 01100101
Hahaha
I think im going to just buy the intellitouch system. I already spent $400 on screen logic, and $1100 on IC40 and PC100. I might as well return it all (Still can), and buy the intellitouch 521905 for $2k here which has everything I need. It has everything I need for salt cell, and iPhone control:
And then probably sell the easy touch for $300 or something, right?!
Hi,
sorry for restoring an old thread.
I have the following:
Controller Model: EasyTouch2 8
Controller firmware: 2.160
Can i use this to control XG lights from my pool automation? I went into screenlogic and changed an AUX circuit and intellibrite was one of the choices. Anything else i need?
I haven't yet purchased anything but the pool store thought i may need a J&J electronics colorsplash bluetooth controller. I much rather just use intellitouch to control everything.
Thanks for any advice!
sorry for restoring an old thread.
I have the following:
Controller Model: EasyTouch2 8
Controller firmware: 2.160
Can i use this to control XG lights from my pool automation? I went into screenlogic and changed an AUX circuit and intellibrite was one of the choices. Anything else i need?
I haven't yet purchased anything but the pool store thought i may need a J&J electronics colorsplash bluetooth controller. I much rather just use intellitouch to control everything.
Thanks for any advice!