I am trying to attach a newly purchased solar cover reel to the reel system. The instructions are horrible and different parts came with the reel and with the tube. Attached is a picture of the tube, the handle end and the tube insert (this one came with the tube and fits it) and white thingamabobs which fit in the end of the tube but don't seem to attach to the inserts. There's bolt holes running through the tube and inserts but if I run a bolt through there it blocks the handle. HELP!
assembly help hydrotools reel
- Thread starter mchecc
- Start date
- Feb 6, 2015
- 6,076
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
Here's some online instructions. Solar Reel Instructions You can always email them too - customer service email on their main page.
If I had to guess, that's a model 55000 reel. Apparently, some of those parts may or may not be needed based on the overall length of the tube (when assembled). How many tube sections do you have?
Please edit you profile to add the state ofer on the left side
<<---------------
If I had to guess, that's a model 55000 reel. Apparently, some of those parts may or may not be needed based on the overall length of the tube (when assembled). How many tube sections do you have?
Please edit you profile to add the state ofer on the left side
<<---------------