Latest activity Postings Media About
-
-
Wntrequinx reacted to Big Nodge's post in the thread Forgive Me Pool Elders, I have Sinned (stain ID and removal help) with
Like.
Thanks for the thoughts everyone. We do indeed use a cover in winter, it’s a large, irregular shaped pool with a custom cover. But there... -
-
Wntrequinx replied to the thread Forgive Me Pool Elders, I have Sinned (stain ID and removal help).Looks like whatever is causing the stains settled on the bottom, including on the leaves, so removing the leaves removed the presumably...
-
-
Wntrequinx replied to the thread Hartford CT Demo - Updated: current status of build and some photos added via comments.Well, let the chlorine get away from me (maybe only had it properly chlorinated until Tues...) but it still is looking nice, even if it...
-
-
-
Wntrequinx replied to the thread New Pool Suggestions.With that budget, you can definitely do a self install. We spent just about 5k to replace an existing 24' round with 48" walls, with a...
-
Wntrequinx reacted to Newdude's post in the thread Hartford CT Demo - Updated: current status of build and some photos added via comments with Like.
Lemme call the ladies. @kimkats @zea3 @Casey @Mdragger88
-
Wntrequinx replied to the thread Hartford CT Demo - Updated: current status of build and some photos added via comments.You and @zea3 were super helpful in pointing me to look into the gasket! Can't believe I didn't look into it myself because I was just...
-
Wntrequinx reacted to kimkats's post in the thread Hartford CT Demo - Updated: current status of build and some photos added via comments with Like.
What an adventure! Well done on getting the right tools and learning to put them on the right way!!!
-
Wntrequinx replied to the thread Hartford CT Demo - Updated: current status of build and some photos added via comments.Finally up and running! So the pool is up, level, and filled, the liner has like 50 wrinkles in it (but I plan to vacuum and brush...
-
-
-
Wntrequinx replied to the thread Hartford CT Demo - Updated: current status of build and some photos added via comments.Ok so that was actually all I needed! And I went and got a 1/4" socket to use the #3 drill bit with, to give my noodle-arms (weak)...
-
-
-
Wntrequinx replied to the thread Probably fine, but can I use a 1 1/4 hose from skimmer to pump?.Soooo... I went and installed the 3 ft 1 1/4in hose from the skimmer to the pump, got the pump running, and then went and read the...
-
Wntrequinx replied to the thread Hartford CT Demo - Updated: current status of build and some photos added via comments.Do you have any advice? Other than use the right size screwdriver and the gasket goes on both sides? Did you have any issues with it...
-
-
Loading…
-
Loading…
-
Loading…
