Recent content by Valentje

I typically will backwash once, maybe twice between DE grid cleanings twice a year, but could probably get away without backwashing. When I first moved into the house I was doing it more frequently based on recommendations from the inspection, but I realized after cleaning the grids that I...

Here are some pictures of the cracks

Thanks all and apologies for the delay in my response - waited to take apart again until there would be no risk of nigh-time freeze. To answer some questions: 1. No water drips on the suction side that are visible when pump is off or on 2. when set to "closed" on the MPV, no water loss on the...

Hi, Having an issue on the pressure side with air getting into the system when the pump gets turned off and I cannot seem to locate the leak. Started noticing about 8 months ago with a little air being forced through returns whenever the pump would turn on. Gradually got worse so I decided to...

Thank you - I will make that change. Is it worth changing out the temperature sensor on IC 40? It allows me to change % via EZ touch, just doesn't show salt.

Hi all, Had an issue with my IC40 not showing salt levels on my Easy Touch. Found out through this forum that I have a bad temp sensor that isn't communicating with the easy touch. I'm still generating salt, so no major issues there as I test the salt levels with reagents monthly. While...