Latest activity Postings Media About
-
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.Thinking about putting the old rat kit mesh on this heater. Ammonia has kept them off my window sills. Wonder if pouring it around the...
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.Finally got the pump primed(lid air leak), turned the heater on and it works🤗 Thank James for the 230/120 plug info.
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.Thanks. My pump all of a sudden is not pumping water, so I won't try the heater until I get that solved.
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.Checked and the supply is only 120V. Is there anything else that should be changed other than taking out the 240V plug and installing...
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.Thanks, James. I should be able to figure out what the supply is. The breaker box is outside near the heater. There are two single...
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.Just opened my old heater and the loose plug is the 240, so it must have been running on 120. Where do I test to verify that I have the...
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.Looks just like this pic with the 120V plug loose in there.
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.AFS works, so will go from there with the multimeter checking components. Thanks for the help, everyone.
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.You have the new “connected” heater model. The LED diagnostics that were on the back of the board are now displayed on the screen and...
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.There is so much much noise from my pool pump nearby that I am not sure what I should be hearing. Blew in the tube softly and then...
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.This heater is brand new, so I would hope all parts work the way they should, but I will try the things you suggest.
-
TTerry D. replied to the thread New Max-E-Therm 400 won't fire up.The blower is on, the red Heating LED blinks on and off, the LCD screen shows SPA temp at 68 and set to 98. After about ten seconds...
-
-
-
Loading…
-
Loading…
-
Loading…
