Recent content by t_liz92

So I got it to fire up. Not sure what the issue was but made sure all the wires on the board were pushed in and suddenly it worked. Hopefully it lasts. My new issue is the small leak coming from the thermistor area that I couldn’t get to seal. Upon further inspection there looks to be a small...

Is that bottom sensor supposed to not have a probe? And if that is not functioning correctly, does it have anything to do with the E01 code?

Alright so, I replaced the thermistor per the video above without much progress. I took out the original thermistor on the heater's input line and it actually seemed like it was in really good shape. I had the heater serviced last season so I wonder if it was replaced then. I noticed there's...

Thanks, I'll give it a go. Seemed like most people with this error code at least had their system trying to start or the blower kicking on. I didn't know if that made a difference since mine makes no attempt at anything upon powering on.

When I turn the heater on I'm instantly getting the E01 code and nothing else on the screen. It doesn't even attempt to fire up. Does this correlate with it being the thermistor because of E01 code or something else since it isn't even trying to fire? Board looks in good shape. LCD on front was...

I hope that's all it is. I'll check the valves when I stop home. So if the pipes to the skimmer are left of the first jandy valve going to the pump, is it safe to assume the other pipes are for the drains? If that's the case, should the valve all the way to the left in the picture be completely...

Hi everyone. I searched the forums and have an idea of some things to try but wanted to see if it was able to be troubleshooted further with some help. I just had my inground pool opened yesterday by an outside company. It's my 2nd year with it so still learning. I went to hook up my manual...