Recent content by Sangster

It has a vacuum port for a manual vacuum, but no robot or anything automatic. Just the port I would plug the long hose into with the vacuum head on the end of a pole. I changed it to 3000 rpm from 8am - 10am, 2000 rpm from 10am - 4pm, and then 1400 rpm from 4pm - 8am. We'll see how it goes.

Hi folks, I'm new. We just moved into a rental with a 14k in-ground pool. It has a screened enclosure and we're in Florida. The pump/filter/salt-water chlorinator is all new when we moved in. It's a Pentair SuperFlo VST Variable Speed Pump using a Pentair Clean N Clear RP cartridge filter...

Just ordered. I hope it's the right one. The picture on Target website is slightly different than the pictures on intex website and other places on the internet. The connectors on the "tube" behind the control box are different. Anyone know what that's about?

i leveled out a 20' circle and i have a good foot on each side still. I used a 10' long 2x6 staked in the middle to level the 20' circle. Worked out great!

Yes, you will need to drain & fill some again to lower the cya level. How did you get 100? Did you test with 50% pool/50% tap water then double the results? The test kits only go up to 100, so if you are at 200 it will still only show 100. Use the 50/50 then double method to see where it's...

Re: Need help with startup of new pool..... Get your cya up, add chlorine to corresponding cya level and swim! :)

Nothing on my Intex Ultra Frame, no problems.

brush and shop vac until it's as clean as you can get it when dry.....then add a bit of water and brush/drain as best you can. Then fill with water, add chlorine/CYA and enjoy!

I also have never shocked my pool since I set it up a couple months ago.

Leaf litter will more than likely clog the"grate" of the opening going into the pump. Sent from my SPH-D710 using Tapatalk 2

Re: Intex Ultra, sytrofoam underlay-How do we put legs on Pa I have my 18'x52" Ultra frame on the 3/4" foam without pavers and it's fine so far. If you really want the pavers (i do recommend it, we were just too lazy), assembly the top ring and place the pavers where the vertical supports will...

wow, it already looks SIGNIFICANTLY better!

I would shock the pool with liquid chlorine/bleach and get the algae under control before worrying about the swg. You'll never know is it's working right if the pool needs to be shocked. Sent from my SPH-D710 using Tapatalk 2

Let's see some "before" pics!

Yep, all the rain and clouds from Beryl dropped our pool temp from 89 to 83.