Recent content by sandeepkc

Problem solved... filling the filter half way thru and waiting for water to come out from the release valve helped. Filter psi went to 20 and stayed there...

I tried priming it by putting water in the skimmer basket and trying all the options - inlet valve to both, skimmer and main drain. As soon as I start the pump, waters get sucked out and then the same noise as in the video appears back. Also, went back to the pool skimmers and checked if the...

Video link.

Pump issue: cleaned my CV460 filters and put the assembly back. As suggested by the instructions on the filter, kept the pressure valve open. Started the Jandy aqua link system back up but it seems either the pump won't flow the water or perhaps I need to wait longer and watch the water fill...

My first test results Free Chlorine : 5 Ph: 8.2 ( seems high), have to lower this Alkanity: 140 ( seems high), have to lower this Calcium: 500 ( seems high), have to lower this CYA : 100 I downloaded the pool math app (PMA). I took a stab at my pool gallons . it is oval shaped 32 ft long...

No, I am yet to buy a test kit and was wondering what is the base one I can start with to ensure I get this right at first before buying the expensive ones. I have a few test strips from Home Depot.

I have a salt water inground plaster pool with Jandy cartridge filter, Jandy SWG and FloPro pump. I went through the basics of school pool and would like to understand a few questions 1. For SWG pools, do I test for chlorine/CYA or salt in my water? 2. Based on what I find low, can you...