Recent content by Richakn

  1. R

    Removing the weir

    Hi, We are going on vacation and I want to leave the pump running, but don’t want to risk the slimmer basket filling with leaves and the motor burning out. Can you remove the weir and leave the pump running? Does that impact the system (other than stop the skimming of leaves?) thanks
  2. R

    Skimmers and water levels

    Photos attached - does this help? It seems like the water is higher (despite being lower than the pool guy told me to maintain it at) than the floating weir.
  3. IMG_8131.JPG

    IMG_8131.JPG

  4. IMG_8132.JPG

    IMG_8132.JPG

  5. IMG_8130.JPG

    IMG_8130.JPG

  6. R

    Skimmers and water levels

    Hi, Is there anything I can do to improve the performance of my skimmer? I have a floating weir skimmer and it struggles to pull in leaves when the water is at the height my pool guy recommended to keep it. I guess I can lower the water level (in the past when the water level has been lower it...
  7. R

    Salt Cell keeps losing power (I think)

    PS I have a Blueworks T-15
  8. R

    Salt Cell keeps losing power (I think)

    So last night the voltage and amp reading to the cell were normal but after about a minute, the control panel would click and the amp reading would drop down from 3.1/2.6 (whatever it was) down to 0 and the salt cell would switch off. This morning, I went outside and the cell is firing ok - amp...
  9. R

    Salt Cell keeps losing power (I think)

    We just opened our pool and I replaced the salt cell - I bought a cheaper brand from Amazon to try out. When we started the pump it seemed to be working, but within a minute or so, I here a quiet click and the 'inspect cell' light comes on and the salt cell stops working (it has a clear case so...
  10. R

    Salt Pool - no Chlorine generation

    Got it - testing kit is on the way, should be delivered in 2 days, then I'll have a better reading and can formulate a plan. I'll get the salt cell cleaned too.
  11. R

    Salt Pool - no Chlorine generation

    So the pool math calculator tells me to do the following (based on 15,000 gallon pool): to get FC from 0.5-4 - add 11oz of 65% calc-hypo to get CYA from 0-40 - add 80oz of granular stabilizer So I'm going to add I packet of my pool shock (64% calc-hypo) and 4lbs (I need to buy more tomorrow to...
  12. R

    Salt Pool - no Chlorine generation

    I don't - I have periodically taken my sample to a pool shop over the years for testing. The paper strips are registering no chlorine or free chlorine (reading were good last month) and no CYA........
  13. R

    Salt Pool - no Chlorine generation

    CYA levels are very low - that's just from the test strips v a more accurate water test. I have historically cleaned the cell when it looks like I'm not generating, but I think that's only happened once or twice - I didn't clean the cell last winter. Seems like I need to get some liquid...
  14. R

    Salt Pool - no Chlorine generation

    Hi, I have a salt cell pool - I'm not generating chlorine, so I'm shortly going to clean my salt cell (or replace it - it's over 5 years old), the main issue I have is that I've ruptured my Achillies Tendon, so am only just starting to be able to get down the stairs to do this.......... In...
  15. R

    Aqua Rite salt generator - no power light

    Hi, Here's my situation: We opened the pool two weeks ago and had some filter issues which required the filter tank and filter to be replaced. The pool is now clean and I was ready to add salt. I only had 2 40lb bags, so I added those recognizing I needed more. I checked the salt generator...