RDspaguy's latest activity
-
RGood idea had thought about over fill or leack but had not thought of a bucket to catch them if they happen. Thanks for the idea.
-
RAh, terminology. I have always heard them referred to auto monitoring, as opposed to self testing. You learn something new every day...
-
RRDspaguy replied to the thread 2005 Sundance 850 Marin pump 1 function questions & other small issues.Maybe. Thermal cutout can be a problem with the motor, but can also result from other factors, such as flow restrictions and oversized...
-
RRDspaguy replied to the thread Automated dosing pump.Oxidizers and wood don't mix, get a tub for your jug in case of leaks.
-
RRDspaguy replied to the thread 2005 Sundance 850 Marin pump 1 function questions & other small issues.Having it wired backward like that had the pump running high speed for the full filter cycle, which may have damaged it. Nope. It does...
-
RRDspaguy replied to the thread Automated dosing pump.Yes, but connect downstream from the frog.
-
RStenner Pumps
-
RRDspaguy replied to the thread Caldera Spa Leak - Where is It?.90% of leaks are in the equipment. Check equipment area and drains thoroughly. How full is it? Overfilling can create a siphon back...
-
RRDspaguy replied to the thread 2005 Sundance 850 Marin pump 1 function questions & other small issues.I can't see the motor wiring enough to tell. It should be white on top, then red, then black on the bottom. The capacitor is under the...
-
RRDspaguy replied to the thread 2005 Sundance 850 Marin pump 1 function questions & other small issues.Read the edit to my post. I think you replied before I finished.
-
RRDspaguy replied to the thread 2005 Sundance 850 Marin pump 1 function questions & other small issues.Thermal cut-out. Thermal cut-out reset. ??? Now it gets confusing. Combined with the above, are you sure it's wired properly? While...
-
RRDspaguy replied to the thread Ozonator question.Not on a newer tub with a properly designed ozone system. If you smell ozone as described, it is destroying your spa cover. Properly...
-
RRDspaguy replied to the thread 2005 Sundance 850 Marin pump 1 function questions & other small issues.And it may be. But you get one chance to overheat one of those solder points and then you're buying a new board. Try my suggestion...
-
RRDspaguy replied to the thread 2005 Sundance 850 Marin pump 1 function questions & other small issues.I'd guess it's the start capacitor going out. Does it hum while delayed? Switch high and low speeds and see if the delay disappears...
-
RRDspaguy replied to the thread Help identifying leaky part name and any suggestions (Intex PureSpa ssp-h-10-2).Unfortunately I have never seen one of these. If I had to guess, the screws mount the heater tube to the bulkhead, near side having a...
