Recent content by Pysiek

  1. Pysiek

    Solar cover reel attachment options

    My pool if 30ft in diameter. Couple years ago I tried the reel to remove my solar cover. But every season the cover will tear right where the strap clips are attached. Is there any other way to attach it without making holes in the cover?
  2. Pysiek

    Question about Above Ground Robot

    Mine does the same thing. Sometimes it climbs the wall I don't know why. But I like it.
  3. Pysiek

    Space between upright and wall

    That makes sense. Especially that my pool was taken down last season so I could replace the wall. Pool guy took it down and stack all the uprights like you said flat on the ground. I didn't have that problem last season before he took down the pool
  4. Pysiek

    Space between upright and wall

    THe only thing I can thing about is that the upright was not aligned correctly on the top and bottom cap. I don't think wall should put much pressure on the upright since they are held in place with two small screws only. I don't think it's a problem. Once you bolt both ends of the steel wall it...
  5. Pysiek

    Question about Above Ground Robot

    I have Dolphin E10 pool robot and it's working great.
  6. Pysiek

    Space between upright and wall

    Same as on our pool that was installed couple weeks ago. There is a one upright where I can stuck my finger between wall and the upright.
  7. Pysiek

    DIY AGP Frame using metal roof panels

    I think it will be safer and less work if you just weld the panels together into a long roll or something line that. You will need to drill about 40 holes at each connection (that's how many holes my wall has where the wall ends meet) . I will put some kind of uprights on each seam. How about...
  8. Pysiek

    CYA present even if I have not add it to fresh water

    I think photometer will always get me close enough. I don't need to be "perfect"
  9. Pysiek

    CYA present even if I have not add it to fresh water

    I will try the tap water and probably one more time pool water with another pill. Anyone ever did a test where they compare TF-100 to ColorQ results
  10. Pysiek

    CYA present even if I have not add it to fresh water

    That makes sense cause I do use one. I had no idea they put CYA in the pucks. And yes this is new fresh water.
  11. Pysiek

    CYA present even if I have not add it to fresh water

    I bought the LaMotter ColorQ Pro 7. I have to add a pill to the glass tube and crush it to get CYA reading. So I assume the 12 might come from the pill? Or basically the unit is faulty?
  12. Pysiek

    CYA present even if I have not add it to fresh water

    So I tested my water last night. CYA came up to be about 12. Is this is correct if I just filled my pool and have not yet add it? Or is it just a reading from the solution I added to the mix ?
  13. Pysiek

    TA adjusted and what's now?

    I did this. Pointed return towards top of water
  14. Pysiek

    TA adjusted and what's now?

    Or how about this
  15. Pysiek

    TA adjusted and what's now?

    I was also thinking maybe a compressor or some kind of pump to speed up the process.