Recent content by Paxcou

The tube working with chlorine are very specific. The tube got a leak first and then the pump. I am going to try another one. And will try to change the tube inside.

It was Chlorine which seems to be more damaging to the pump than muriatic acid based on what I've read.

I used a similar pump last year for chlorine but after 3 weeks it was gone. The chlorine seems to be too much for it.

Is there any cheaper but still reliable alternatives?

I am looking for a pump feeder for chlorine. My goal is to find one that will not break my budget too much while being safe and compatible with liquid chlorine. Last year I designed my feeder system and it was terrific but after few weeks my pump died on me. What would you suggest ? Thanks for...

Thanks for your answer very detailed. I realized my answer was not posted. Really appreciate the time you spend to answer me with a great level of details.

I am anticipating my next spring project. We have decided to not invest in a gaz pool heater, or heat pump. We are going to build this winter a solar pool heater system as many have done already. The design could use a pool diverter valve. However the flow rate in the diy solar system will be...

You were right. After 10 days, a small leak appeared in the pump, and I stopped it. I need to invest in a pump designed for chlorine. Rola-Chem 543702 Peristaltic Pump Chlorine Feeder 32 GPD https://a.co/d/dBobFjY

It's after the heater. And the chlorine is added directly to the Pool Frog Leap Infuzer Cycler that I used to use before I joined this forum. I assume that it's then safe with or without heater. But anyway, the heater is not working anymore. I don't use it. If i install a new heater I will add...

I was looking at building a liquide chlorine dispenser. I have been inspired by one post on the forum where one of you has used a Shelly smart switch to control the dispenser. As I was already using a Shelly to control the pool system, I rolled up my sleeves and I have designed my own...

I have measured the diameter of the pipe going in the pool heater and it's 1" and 1/2. I believe based on your document I have the 400. What do you think ?