Recent content by Nikola

  1. N

    added heat pump more than doubles psi

    The panels are on the roof - one story house.... I will take a picture tomorrow. The pressure has always been 10 psi with or without going through solar (maybe 10 without and 12 with) but very very minimal change. And I always wash the filter once to twice a month or more if needed. This...
  2. N

    added heat pump more than doubles psi

    Yes. And it will turn on when enough sun - which I am sure you know :-) The pool company said he has done a few installs like this where homeowners start out with solar, but then realize it isn't enough all year, so they add heat pump, so the water is suppose to go to the solar first, to...
  3. N

    added heat pump more than doubles psi

    yes. please see attached. psi reading currently at 28, when use to be 10. Also attached is a picture of the fountain which use to go as high as the brown bar of screen
  4. fountain post heater.jpg

    fountain post heater.jpg

  5. Pool and heater setup.jpg

    Pool and heater setup.jpg

  6. N

    added heat pump more than doubles psi

    I believe so.... The gentleman from the pool company came by to check. I am unfortunately at their mercy, but I did look at the users manual and compare it to the hookup at my pool and it seems to be correct. I will double check it again though. Thank you for your reply.
  7. N

    added heat pump more than doubles psi

    I have a 1.5 hp pentair heater model 160354, and all was fine, starting at 10 psi, (pool is 13,000 gallons, 14 x 28, and 3.5-5.5 deep) We just added a heat pump, Rheem Raypak model 5450 and now the starting pressure jumped to almost 30 psi. I read 30 psi starting pressure is too high...